On December 22, 2007 06:20:55 am Edd Barrett wrote:
> Hi there,
>
> I have been seeing some very odd behavior on 4.2-current recently.
>
> I use hotplug. My workstation at work frequently reboots upon insertion of
> a usb stick. This may be an electronic fault, but my main workstation at
> home (same hardware exactly), can panic like so:
>
> ---8<---
> cd /mnt/hot/sd0
> mkdir mo
> uvm_fault(0xd07a2040, 0xf2e7b000, 0, 1) -> e
> kernel: page fault trap, code=0
> Stopped at updatefats+0x3c testl %eax,0(%esi,%edx,4)
> ddb>
> ---8<---
>
> Unfortunatley the ddb prompt does not respond to my USB keyboard. It seems
> to be repeatable, so I will dig around for a serial line or ps2 keyboard if
> I don't hear anything back before sunday (when I have time). Hopefully then
> I can get a backtrace.
>
> Dmesg follows (with USB stick inserted):
> ---8<---
> OpenBSD 4.2-current (GENERIC) #592: Sun Dec 9 17:44:05 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
>USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem =
> 2397855744 (2286MB)
> avail mem = 2310959104 (2203MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.3 @ 0xfbe40 (76 entries)
> bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012" date
> 04/05/2004
> bios0: Intel Corporation D865GLC
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d00/224 (12 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
> 0x00) pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xa200! 0xca800/0x1000 0xcb800/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
> agp0 at pchb0: aperture at 0xf0000000, size 0x8000000
> vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 3 function 0 "Intel 82865G/PE/P CPU-CSA" rev 0x02
> pci1 at ppb0 bus 1
> em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 10,
> address 00:0c:f1:f5:13:3c
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
> uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci2 at ppb1 bus 2
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
> wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
> wd1 at pciide0 channel 0 drive 1: <HDS728080PLAT20>
> wd1: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd2 at pciide0 channel 1 drive 0: <IC35L060AVV207-0>
> wd2: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1302, 1006> SCSI0
> 5/cdrom removable
> wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 10 for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: emc6d100 rev 0x65
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
> spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ff6d netmask ff6d ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Sun Microsystems Type
> 6 Mouse" rev 1.00/1.02 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons
> wsmouse0 at ums0 mux 0
> uhidev1 at uhub1 port 1 configuration 1 interface 0 "Sun Microsystems Type
> 6 Keyboard" rev 1.00/1.01 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes, layout 32
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uaudio0 at uhub3 port 2 configuration 1 interface 0 "M Audio MobilePre" rev
> 1.10/1.03 addr 2
> uaudio0: audio rev 1.00, 9 mixer controls
> audio0 at uaudio0
> softraid0 at root
> dkcsum: wd0 matches BIOS drive 0x82
> dkcsum: wd1 matches BIOS drive 0x81
> dkcsum: wd2 matches BIOS drive 0x80
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> umass0 at uhub0 port 2 configuration 1 interface 0 "Easy Disk" rev
> 2.00/1.10 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <Easy, Disk, V1.1> SCSI0 0/direct removable
> sd0: 3936MB, 501 cyl, 255 head, 63 sec, 512 bytes/sec, 8060928 sec total
> ---8<---
Good day,
I know very little about hardware but noticed in your dmesg that
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC2700CL2.5
> spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
I wonder whether that has something to do with the problem you described.
Anyways I had compiled -current yesterday and just now tried a USB stick
without any problems.
>From /var/log/messages
Dec 22 06:40:25 web1 /bsd: umass0 at uhub0 port 5 configuration 1 interface
0 "Genesys USB Reader" rev 2.00/93.17 addr 2
Dec 22 06:40:25 web1 /bsd: umass0: using SCSI over Bulk-Only
Dec 22 06:40:25 web1 /bsd: scsibus2 at umass0: 2 targets
Dec 22 06:40:25 web1 /bsd: sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE
DEVICE, 9317> SCSI0 0/direct removable
Dec 22 06:40:25 web1 /bsd: sd0: drive offline
Dec 22 06:40:25 web1 /bsd: sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE
DEVICE, 9317> SCSI0 0/direct removable
Dec 22 06:40:25 web1 /bsd: sd1: drive offline
Dec 22 06:40:25 web1 /bsd: ugen0 at uhub0 port 9 "Realtek RTL8187" rev
2.00/1.00 addr 3
Dec 22 06:40:25 web1 /bsd: softraid0 at root
Dec 22 06:40:25 web1 /bsd: root on wd0a swap on wd0b dump on wd0b
Dec 22 06:40:25 web1 savecore: no core dump
Dec 22 06:41:01 web1 /bsd: umass1 at uhub0
Dec 22 06:41:01 web1 /bsd: port 8 configuration 1 interface 0 "Flash Drive
AL_USB20" rev 2.00/2.00 addr 4
Dec 22 06:41:01 web1 /bsd: umass1: using SCSI over Bulk-Only
Dec 22 06:41:01 web1 /bsd: scsibus3 at umass1: 2 targets
Dec 22 06:41:01 web1 /bsd: sd2 at scsibus3 targ 1 lun 0: <Flash, Drive
AL_USB20, 1.00> SCSI2 0/direct removable
Dec 22 06:41:01 web1 /bsd: sd2: 3974MB, 506 cyl, 255 head, 63 sec, 512
bytes/sec, 8139776 sec total
Dec 22 06:41:51 web1 /bsd: sd2 detached
Dec 22 06:41:51 web1 /bsd: scsibus3 detached
Dec 22 06:41:51 web1 /bsd: umass1 detached
Here is my dmesg
OpenBSD 4.2-current (GENERIC.MP) #0: Fri Dec 21 13:27:32 CST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 3219681280 (3070MB)
avail mem = 3120087040 (2975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/05/06, BIOS32 rev. 0 @ 0xfbe30,
SMBIOS rev. 2.4 @ 0xf0000 (71 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS P5N32-SLI PREMIUM ACPI
BIOS Revision 0603" date 12/05/2006
bios0: ASUSTeK Computer INC. P5N32-SLI PREMIUM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) XVR4(S5)
XVR5(S5) XVRA(S5) XVRB(S5) XVRC(S5) USB0(S4) USB2(S4) AZAD(S5) MMAC(S5) MAC1
(S5) UAR1(S5) UAR2(S5) PS2M(S4) PS2K(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz0 at acpi0: critical temperature 75 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "NVIDIA", unknown product 0x0071 rev
0xc1
vendor "NVIDIA", unknown product 0x007f (class memory subclass RAM, rev 0xa1)
at pci0 dev 0 function 1 not configured
vendor "NVIDIA", unknown product 0x0075 (class memory subclass RAM, rev 0xa1)
at pci0 dev 0 function 2 not configured
vendor "NVIDIA", unknown product 0x006f (class memory subclass RAM, rev 0xa1)
at pci0 dev 0 function 3 not configured
vendor "NVIDIA", unknown product 0x00b4 (class memory subclass RAM, rev 0xa1)
at pci0 dev 0 function 4 not configured
vendor "NVIDIA", unknown product 0x0076 (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 0 not configured
vendor "NVIDIA", unknown product 0x0078 (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 1 not configured
vendor "NVIDIA", unknown product 0x0079 (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 2 not configured
vendor "NVIDIA", unknown product 0x007a (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 3 not configured
vendor "NVIDIA", unknown product 0x007b (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 4 not configured
vendor "NVIDIA", unknown product 0x007c (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 5 not configured
vendor "NVIDIA", unknown product 0x007d (class memory subclass RAM, rev 0xa1)
at pci0 dev 1 function 6 not configured
ppb0 at pci0 dev 2 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev
0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "NVIDIA MCP04 PCIE" rev 0xa2
pci2 at ppb1 bus 2
sili0 at pci2 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01: apic 4
int 7 (irq 7)
scsibus0 at sili0: 2 targets
"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP55 ISA" rev 0xa2
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
iic1 at nviic0
adt0 at iic1 addr 0x2e: adt7475 rev 0x69
"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 10 function 2 not configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 4 int 7 (irq
7), version 1.0, legacy support
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 4 int 5 (irq
5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H22N, 1.01> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide1: using apic 4 int 10 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200KS-75PFB0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <WDC WD3200KS-75PFB0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 14 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide2: using apic 4 int 11 (irq 11) for native-PCI interrupt
pciide3 at pci0 dev 14 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide3: using apic 4 int 5 (irq 5) for native-PCI interrupt
ppb2 at pci0 dev 15 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci3 at ppb2 bus 3
vr0 at pci3 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 11
(irq 11), address 00:17:9a:7e:ac:59
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI
0x004063, model 0x0034
"VIA VT6306 FireWire" rev 0xc0 at pci3 dev 11 function 0 not configured
azalia0 at pci0 dev 15 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: apic 4 int
5 (irq 5)
azalia0: codec[s]: Analog Devices/0x198b
audio0 at azalia0
nfe0 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 11 (irq
11), address 00:18:f3:70:21:b7
eephy0 at nfe0 phy 19: Marvell 88E1116 Gigabit PHY, rev. 1
nfe1 at pci0 dev 18 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic 4 int 7 (irq
7), address 00:18:f3:70:2a:93
eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
ppb3 at pci0 dev 19 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 24 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci6 at ppb5 bus 6
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 0x02, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Genesys USB Reader" rev
2.00/93.17 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9317> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE DEVICE, 9317> SCSI0 0/direct
removable
sd1: drive offline
ugen0 at uhub0 port 9 "Realtek RTL8187" rev 2.00/1.00 addr 3
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
umass1 at uhub0 port 8 configuration 1 interface 0 "Flash Drive AL_USB20" rev
2.00/2.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets
sd2 at scsibus3 targ 1 lun 0: <Flash, Drive AL_USB20, 1.00> SCSI2 0/direct
removable
sd2: 3974MB, 506 cyl, 255 head, 63 sec, 512 bytes/sec, 8139776 sec total
sd2 detached
scsibus3 detached
umass1 detached
--
Vijay Sankar, M.Eng., P.Eng.
President & CEO
ForeTell Technologies Limited
59 Flamingo Avenue, Winnipeg, MB Canada R3J 0X6
Phone: +1 204 885 9535, E-Mail: [EMAIL PROTECTED]
