I'm trying to boot OpenBSD 3.9 on my sony vaio, in order to play with it
onto my laptop (which is currently powered by freebsd).
Everything seems to be fine, except wireless card:
wi0 at pci2 dev 2 function 0 "Intersil PRISM2.5" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
Despite the fact wi0 is recognised, it doesn't appears in ifconfig output,
e.g. ifconfig wi0 says no such device.
I've googled this out but still out of luck.
Any ideas how to fix it? Thanks in advance.
full dmesg:
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.99 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACP
I,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 535863296 (523304K)
avail mem = 483098624 (471776K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(60) BIOS, date 04/22/03, BIOS32 rev. 0 @ 0xfd891
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
wi0 at pci2 dev 2 function 0 "Intersil PRISM2.5" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: irq 3
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
ohci0 at pci2 dev 7 function 0 "NEC USB" rev 0x43: irq 9, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 7 function 1 "NEC USB" rev 0x43: irq 10, version 1.0,
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 7 function 2 "NEC USB" rev 0x04: irq 3
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 10,
address 08:00:46:ac:4c:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to c
ompatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-40>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801CA/CAM AC97" rev 0x02 at pci0 dev 31 function 5 not configured
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
uhidev0 at uhub0 port 3 configuration 1 interface 0umass0 at uhub1 port 2
configuration 1 interface 0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.90, addr 2
umass0: using ATAPI over CBI with CCI
scsibus1 at umass0: 2 targets
uhidev0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
uhid at uhidev0 not configured
sd0 at scsibus1 targ 1 lun 0: <Sony, MSC-U03, 2.00> SCSI0 0/direct removable
sd0: drive offline
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
