OpenBSD Team,
I have been trying to install OpenBSD on an older PII 400 pc with an
Abit BE6 (440 BX chipset) motherboard. In the process, I have verified
with memtest86 that I have 128 Mb of good RAM (one stick), updated the
BIOS to the latest version, andverified that OpenBSD 3.7, 3.8 and 3.9
will not install. This is my first attempt at
installing an Unix/Linux OS, so I am not really suited to
troubleshooting. I have also tried FreeBSD and SUSE Linux with same
results.
I petitioned the comp.unix.bsd.openbsd.misc newsgroup. Several thoughts
we posed there that have not helped. The last thought was to ask via
this email. I have a verbose install log if that would help. I am
including snippets from a regular log and a verbose log.
I have a Plextor CD-RW drive, a Maxtor 20Gb HDD, a single floppy drive,
a Creative Soundblaster LIVE!, a Voodoo3 2000 video card, and a Network
Everywhere (NC100) ethernet card. I have tried ACPI on/off and PNP off.
I have tried numerous different floppies, several different CD and the
network install.
The fact that Win98 installs easily and is very happy probably means
little in diagnosing the problem, thank you again MS.
Any assistance would be greatly appreciated!
***snippet start***
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 401
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 268017664 (261736K)
avail mem = 238702592 (233108K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
User Kernel Config
UKC> verbose
autoconf verbose enabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(d6) BIOS, date 06/11/99, BIOS32 rev. 0 @
0xfb3f0
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb86c
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <BCD 48SB, CD-ROM, C2.8> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
"Creative Labs SoundBlaster Live" rev 0x06 at pci0 dev 13 function 0 not
configured
"Creative Labs PCI Gameport Joystick" rev 0x06 at pci0 dev 13 function 1
not configured
dc0 at pci0 dev 17 function 0 "ADMtek AN983" rev 0x11: irq 10, address
00:04:5a:89:e9:77
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
pciide1 at pci0 dev 19 function 0 "HighPoint HPT36x/37x IDE" rev 0x01:
DMA
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 2B020H1>
wd0: 16-sector PIO, LBA, 19541MB, 40020624 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide2 at pci0 dev 19 function 1 "HighPoint HPT36x/37x IDE" rev 0x01:
DMA
pciide2: using irq 11 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
fatal page fault in supervisor mode
trap type 6 code 0 eip d01a123e cs 50 eflags 10246 cr2 5bf800ec cpl a0
panic: trap type 6, code=0, pc=d01a123e
syncing disks... done
dumping to dev 1101, offset 0
dump error 19
rebooting...
***snippet end***
***verbose snippet start***
pckbc0 at isa0 port 0x60/5
>>> probing for pckbd*
>>> pckbd probe returned 2
>>> pckbd probe won
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
>>> probing for wskbd*
>>> wskbd probe returned 1
>>> wskbd probe won
wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>> probing for pckbd*
>>> pckbd probe returned 0
>>> no winning probe
>>> probing for vga0
>>> probing for vga0 failed
>>> probing for pcdisplay0
>>> probing for pcdisplay0 failed
>>> probing for bha0
>>> probing for bha0 failed
>>> probing for aic0
>>> probing for aic0 failed
>>> probing for aha0
>>> probing for aha0 failed
>>> probing for aha1
>>> probing for aha1 failed
>>> probing for uha0
>>> probing for uha0 failed
>>> probing for wdc0
>>> probing for wdc0 failed
>>> probing for wdc1
>>> probing for wdc1 failed
>>> probing for ne0
>>> probing for ne0 failed
>>> probing for ne1
>>> probing for ne1 failed
>>> probing for ne2
>>> probing for ne2 failed
>>> probing for we0
>>> probing for we0 failed
>>> probing for we1
>>> probing for we1 failed
>>> probing for ec0
>>> probing for ec0 failed
>>> probing for ep0
>>> probing for ep0 failed
>>> probing for ep*
>>> probing for ep* finished
>>> probing for ie0
>>> probing for ie0 failed
>>> probing for ex0
>>> probing for ex0 failed
>>> probing for le0
>>> probing for le0 failed
>>> probing for npx0
>>> probing for npx0 succeeded
npx0 at isa0 port 0xf0/16: using exception 16
>>> probing for pccom0
>>> probing for pccom0 succeeded
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
>>> probing for pccom1
>>> probing for pccom1 succeeded
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>>> probing for pccom2
>>> probing for pccom2 failed
>>> probing for fdc0
>>> probing for fdc0 succeeded
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>>> probing for fd*
>>> fd probe returned 1
>>> fd probe won
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>>> probing for fd*
>>> fd probe returned 0
>>> no winning probe
>>> probing for fd*
>>> fd probe returned 0
>>> no winning probe
>>> probing for fd*
>>> fd probe returned 0
>>> no winning probe
>>> probing for ahc0
>>> probing for ahc0 failed
>>> probing for isapnp0
>>> probing for isapnp0 failed
>>> probing for pcic0
>>> probing for pcic0 failed
>>> probing for pcic1
>>> probing for pcic1 failed
>>> probing for pcic2
>>> probing for pcic2 failed
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
fatal page fault in supervisor mode
trap type 6 code 0 eip d01a123e cs 50 eflags 10246 cr2 5bf800ec cpl a0
panic: trap type 6, code=0, pc=d01a123e
syncing disks... done
dumping to dev 1101, offset 0
dump error 19
rebooting...
***snippet end***
I firmly believe in teaching a hungry man to fish vice giving him fish.
But sometimes you do need to supply the man with the gear to go fish.
Any more data you might need, please advise.
Again, thanks for any thoughts/help.
Regards,
JM
--
[EMAIL PROTECTED]
--
http://www.fastmail.fm - Same, same, but different
