On Tue, Nov 19, 2019 at 08:33:39PM +0100, Felix Maschek wrote:

> I want to use DHCP to get an IP address and the gateway address. But I want
> to use my explicit defined nameserver (not the one given by DHCP).
> 
> Is that possible?

Why don't you try what I told you? It does exactly what you are
asking. You can also read about in in man dhclient.conf.

        -Otto

> 
> Kind regards
> 
> Felix
> 
> On 2019-11-19 20:06, Otto Moerbeek wrote:
> > On Tue, Nov 19, 2019 at 06:33:43PM +0100, Felix Maschek wrote:
> > 
> > > I've got the following report from the webpage:
> > > 
> > > You use 12 DNS servers:
> > > 46.182.19.48        Germany    AS43847 Martin Prager trading as NbIServ
> > > 217.237.150.89        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.90        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.91        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.92        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.93        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.94        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.95        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.150.96        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.151.215        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.151.217        Germany    AS3320 Deutsche Telekom AG
> > > 217.237.151.221        Germany    AS3320 Deutsche Telekom AG
> > > 
> > > Kind regards
> > If you do not want to use dhcp at all you can use
> > 
> > supersede domain-name-servers 127.0.0.1;
> > 
> > (instead of prepend) in dhclient.conf
> > 
> >     -Otto
> > 
> > 
> > > 
> > > Felix
> > > 
> > > 
> > > 
> > > On 2019-11-19 18:10, Felix Maschek wrote:
> > > > Hi,
> > > > 
> > > > status is showing:
> > > > 
> > > >      vatrox$ unwindctl status
> > > >      captive portal is unchecked
> > > > 
> > > >      selected             type status
> > > >             *              DoT validating
> > > >                       recursor validating
> > > > 
> > > > When I check with https://bash.ws/dnsleak, which DNS are contacted then
> > > > I can see, that not only the configured DNS is called. There are several
> > > > DNS as given by DHCP called, too. They, of course are supporting DoT as
> > > > well.
> > > > 
> > > > Kind regards
> > > > 
> > > > Felix
> > > > 
> > > > On 2019-11-19 16:56, Otto Moerbeek wrote:
> > > > > On Tue, Nov 19, 2019 at 04:51:09PM +0100, Felix Maschek wrote:
> > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > I have a running unwind configuration:
> > > > > > 
> > > > > > /etc/unwind.conf
> > > > > > 
> > > > > >       forwarder 46.182.19.48 port 853 authentication name
> > > > > > dns2.digitalcourage.de DoT
> > > > > > 
> > > > > >       preference { DoT recursor }
> > > > > > 
> > > > > > 
> > > > > > Unfortunately this DNS from Digitalcourage is sometimes slow and
> > > > > > so the DNS
> > > > > > learned from DHCP (which is supporting DoT, too) is called.
> > > > > > 
> > > > > > Is it possible to prevent this fallback so that only calls to
> > > > > > the specified
> > > > > > DNS are made?
> > > > > > 
> > > > > > Kind regards
> > > > > > 
> > > > > > Felix
> > > > > > 
> > > > > What does unwindctl status show?
> > > > > 
> > > > >      -Otto
> > > > > 
> 

Reply via email to