Hello all, I have audio trouble: no sound whatsoever, and error messages.
In a first terminal window, as root, I typed # sndiod -ddd In a second terminal window I typed # file ./sound.wav ./sound.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 11025 Hz # aucat -i ./sound.wav default: couldn't open audio device The first terminal window shows this: petal# sndiod -ddd snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup helper(helper|ini): created worker(worker|ini): created listen(/tmp/sndio/sock0|ini): created sock(sock|ini): created listen(/tmp/sndio/sock0|ini): processed in 6261us sock,rmsg,widl: AUTH message helper: recv: cmd = 0, num = 0, mode = 3, fd = -1 helper: send: cmd = 3, num = 0, mode = 0, fd = -1 helper(helper|ini): processed in 123554us helper: recv: cmd = 0, num = 0, mode = 1, fd = -1 helper: send: cmd = 3, num = 0, mode = 0, fd = -1 helper(helper|ini): processed in 236812us sock,rmsg,widl: HELLO message sock,rmsg,widl: hello from <aucat>, mode = 1, ver 7 aucat0: overwritten slot 0 snd0 pst=cfg: device requested worker: send: cmd = 0, num = 0, mode = 3, fd = -1 worker: recv: cmd = 3, num = 0, mode = 0, fd = -1 worker: send: cmd = 0, num = 0, mode = 1, fd = -1 worker: recv: cmd = 3, num = 0, mode = 0, fd = -1 worker: send: cmd = 0, num = 0, mode = 2, fd = -1 worker: recv: cmd = 3, num = 0, mode = 0, fd = -1 snd0 pst=cfg: rsnd/0: failed to open audio device sock,rmsg,widl: closing sock(sock|zom): destroyed sock(sock|zom): processed in 484951us helper: recv: cmd = 0, num = 0, mode = 2, fd = -1 helper: send: cmd = 3, num = 0, mode = 0, fd = -1 helper(helper|ini): processed in 121169us This is an ancient Thinkpad 380D laptop. Sound was working before OpenBSD. Some time ago I installed OpenBSD 6.0, and the last couple of days I have updated 6.1, 6.2.,... up to 6.5 Permissions: petal# ls -la /dev/sound* lrwxr-xr-x 1 root wheel 6 Jan 14 2018 /dev/sound -> sound0 crw-rw-rw- 1 root wheel 42, 0 Jan 14 2018 /dev/sound0 crw-rw-rw- 1 root wheel 42, 1 Jan 14 2018 /dev/sound1 crw-rw-rw- 1 root wheel 42, 2 Jan 14 2018 /dev/sound2 petal# ls -la /dev/audio* crw-rw-rw- 1 root wheel 42, 0 May 12 17:37 /dev/audio0 crw-rw-rw- 1 root wheel 42, 1 May 12 17:37 /dev/audio1 crw-rw-rw- 1 root wheel 42, 2 May 12 17:37 /dev/audio2 crw-rw-rw- 1 root wheel 42, 192 May 12 17:37 /dev/audioctl0 crw-rw-rw- 1 root wheel 42, 193 May 12 17:37 /dev/audioctl1 crw-rw-rw- 1 root wheel 42, 194 May 12 17:37 /dev/audioctl2 /etc/group says that I (user) am in wheel. While being still being in OpenBSD 6.0 I followed part of the installation instructions from http://www.sndio.org/install.html (yes, for linux) and typed #mkdir /var/run/sndiod #useradd -g audio -s /sbin/nologin -d /var/run/sndiod sndiod Here is dmesg: OpenBSD 6.5 (GENERIC) #1: Wed Apr 24 22:04:27 CEST 2019 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC real mem = 83378176 (79MB) avail mem = 66617344 (63MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 09/02/99, BIOS32 rev. 0 @ 0xfd860 apm0 at bios0: Power Management spec V1.2 pcibios0 at bios0: rev 2.1 @ 0xfd8a0/0x800 pcibios0: PCI BIOS has 2 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 11 pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371 ISA and IDE" rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc0000/0x8000 cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 153 MHz, 05-04-04 cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX,MELTDOWN cpu0: F00F bug workaround installed pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82437MX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371 ISA and IDE" rev 0x03 vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph 128ZV" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcic3 at pci0 dev 19 function 0 "Cirrus Logic CL-PD6729" rev 0x07 pcic3 controller 0: <Cirrus PD672X> has sockets A and B pcmcia0 at pcic3 controller 0 socket 0 pcmcia1 at pcic3 controller 0 socket 1 wdc2 at pcmcia1 function 0 "Key Technology Corp., FC1307 " port 0x400/16: irq 3 wd0 at wdc2 channel 0 drive 0: <SD to PCMCIA/ATA Adapter> wd0: 1-sector PIO, LBA, 968MB, 1984000 sectors wd1 at wdc2 channel 0 drive 1: <ST506> wd1: 1-sector PIO, CHS, 68MB, 1024 cyl, 8 head, 17 sec, 139264 sectors wd0(wdc2:0:0): using BIOS timings wd1(wdc2:0:1): using BIOS timings pcic3: interrupting at irq 4 pcic3: irq 4, polling enabled isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0: irq 4 already in use pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wdc0 at isa0 port 0x1f0/8 irq 14 wd2 at wdc0 channel 0 drive 0: <TOSHIBA MK4006MAV> wd2: 16-sector PIO, LBA, 3909MB, 8007552 sectors atapiscsi0 at wdc0 channel 0 drive 1 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-38E, 2.0A> ATAPI 5/cdrom removable wd2(wdc0:0:0): using BIOS timings cd0(wdc0:0:1): using BIOS timings sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02 midi0 at sb0: <SB MIDI UART> audio0 at sb0 opl at sb0 not configured pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on wd2a (d7456e801e6096c5.a) swap on wd2b dump on wd2b fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec Please advise, thank you
