Greets
Started to install 3.8 on my laptop (Compaq Presario 2100(2133AP)) this
morning, but ran into a small issue.
Make the floppy38.fs, boot off it fine, starts doing all its kernel
driver loading stuff, but then stops at
<-- snip -->
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/6 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365L rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
<-- end -->
And thats about it. Keyboard is non functional for cttl-alt-del,
caps-lock doesn't flick the light on-off. Just stopped.
Have had 3.7 running on this laptop before, but was having some issues
with getting X.org running. Was going to upgrade to the latest version
before asking about it thou.
Thanks in advance for any help on this.
Fletch
Here is my dmesg from 3.7
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class) 1.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 526950400 (514600K)
avail mem = 473886720 (462780K)
using 4278 buffers containing 26451968 bytes (25832K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(65) BIOS, date 12/17/02, BIOS32 rev. 0 @ 0xfd730
pcibios0 at bios0: rev 2.1 @ 0xfd730/0x8d0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800 0xdf000/0x1000!
0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS100 AGP" rev 0x13
ppb0 at pci0 dev 1 function 0 "ATI RS100 PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon IGP 320M" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 5
ac97: codec id 0x43585429 (Conexant CX20468 rev 1)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D
Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
vendor "Acer Labs", unknown product 0x5457 (class communications
subclass modem, rev 0x00) at pci0 dev 8 function 0 not configured
cbb0 at pci0 dev 10 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x00: irq 5
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST960822A>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD-ROM SDR-083, MX13> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 17 function 0 not
configured
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 11, address 00:0b:cd:18:7a:ae
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
