Greets
Have had X running under linux for many moons now and so figure I would
not have any problems under openbsd. However:
I install all the required base packages, boot and login as root.
I run xorgcfg, and my screen blinks and it fails with Caught signal 11.
Server aborting. So I run xorgconfig instead to set everything up in
text mode. Setup all the values as per many times before (under linux),
and then run startx. screen blinks, Caught signal 11. Server aborting.
Have checked the logs, nothing helpful, googled the inet, nothing
helpful. Have checked that machdep.allowaperture=2 is set in
sysctl.conf, and am running kernel GENERIC#138 i386, so option APERTURE
is set according to the FAQ.
Did this under 3.7 as well.
Does anyone know why?
Thanks
Fletch
<-- Error Log -->
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xe4100000
(==) RADEON(0): Write-combining range (0xe4100000,0x80000) was already clear
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(--) RADEON(0): Chipset: "ATI Radeon IGP320M (U1) 4336" (ChipID = 0x4336)
(--) RADEON(0): Linear framebuffer at 0xec000000
(--) RADEON(0): VideoRAM: 8192 kByte (64 bit DDR SDRAM)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Connector0: DDCType-5, DACType-1, TMDSType--1,
ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1,
ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
<-- Error Log -->
<-- xorg.conf -->
<-- snip -->
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 48.5
VertRefresh 40-70
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "Card0"
Driver "radeon"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen 1"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
<-- xorg.conf -->
<-- dmesg -->
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2
cache) 1.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: FID VID TTP
real mem = 526950400 (514600K)
avail mem = 473763840 (462660K)
using 4278 buffers containing 26451968 bytes (25832K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(65) BIOS, date 12/17/02, BIOS32 rev. 0 @ 0xfd730
pcibios0 at bios0: rev 2.1 @ 0xfd730/0x8d0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800 0xdf000/0x1000!
0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS100 AGP" rev 0x13
ppb0 at pci0 dev 1 function 0 "ATI RS100 PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon IGP 320M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 5
ac97: codec id 0x43585429 (Conexant CX20468 rev 1)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D
Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"Acer Labs M5457 Modem" rev 0x00 at pci0 dev 8 function 0 not configured
cbb0 at pci0 dev 10 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x00: irq 5
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST960822A>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, DVD-ROM SDR-083, MX13> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Acer Labs M7101 Power" rev 0x00 at pci0 dev 17 function 0 not configured
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 11, address 00:0b:cd:18:7a:ae
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
<-- dmesg -->
