Hi,
Since I upgraded to OpenBSD 5.3 Release (following the upgrade guide on
the website), I have experienced the following problem with claws-mail
v3.8.1: Every time I try to fetch mail, a dialog 'Changed SSL
certificate' pops up, for each of my mailboxes. No matter if I
choose 'Cancel connection' or 'Accept and Save certificates', both
frequently result in a core dump.
Even when claws does not crash, the certs are not properly saved, for
the dialog shows up every subsequent fetch. The SSL certs are stored to
disk (~/.claws-mail/certs/), but information about owner and signer is
'<not in certificate>'.
Core dumps also occur when sending mail.
As you understand, this makes usage quite a pain.
Does anyone experience this issue as well?
Could this be due to an incorrect upgrade?
Some terminal output while using claws:
~ $ claws-mail
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size b The request is invalid.
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size b The request is invalid.
++ STATS ++ INC 0 0
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size
** (claws-mail:13183): WARNING **: couldn't gnutls_x509_crt_export to
get size a The request is invalid.
Segmentation fault (core dumped)
~ $ dmesg
OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2011496448 (1918MB)
avail mem = 1935515648 (1845MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0e20 (19 entries)
bios0: vendor Hewlett-Packard version "F.07" date 08/09/2007
bios0: Hewlett-Packard 30D1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SRAT SSDT MCFG HPET APIC BOOT SLIC
acpi0: wakeup devices PCI0(S5) USB0(S0) USB2(S0) Z017(S0) Z018(S0)
MAC0(S5) P2P0(S5) XVR0(S5) XVR1(S5) XVR3(S5) XVR4(S5) XVR5(S5) XVR6(S5)
KBC0(S3) MSE0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at
acpi0 addr 0xe0000000, bus 0-4 acpihpet0 at acpi0: 25000000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55, 1800.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB
64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu0: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative cpu0: apic clock running
at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD
Athlon(tm) 64 X2 Dual-Core Processor TK-55, 1800.17 MHz cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB
64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu1: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative ioapic0 at mainbus0: apid
2 pa 0xfec00000, version 11, 24 pins acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P2P0) acpiprt2 at acpi0: bus -1 (XVR0)
acpiprt3 at acpi0: bus 4 (XVR1)
acpiprt4 at acpi0: bus 3 (XVR2)
acpiprt5 at acpi0: bus -1 (XVR3)
acpiprt6 at acpi0: bus -1 (XVR4)
acpiprt7 at acpi0: bus -1 (XVR5)
acpiprt8 at acpi0: bus -1 (XVR6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibtn1 at acpi0: LID_
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: UVGA
acpivout0 at acpivideo0: LCD_
cpu0: PowerNow! K8 1800 MHz: speeds: 1800 1600 800 MHz
pci0 at mainbus0 bus 0
"NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP67 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP67 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
spdmem0 at iic1 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic1 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
"NVIDIA MCP67 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
"NVIDIA MCP67 Co-processor" rev 0xa2 at pci0 dev 1 function 3 not
configured ohci0 at pci0 dev 2 function 0 "NVIDIA MCP67 USB" rev 0xa2:
apic 2 int 11, version 1.0, legacy support ehci0 at pci0 dev 2 function
1 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int 7 usb0 at ehci0: USB revision
2.0 uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 4 function 0 "NVIDIA MCP67 USB" rev 0xa2: apic 2 int
5, version 1.0, legacy support ehci1 at pci0 dev 4 function 1 "NVIDIA
MCP67 USB" rev 0xa2: apic 2 int 10 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA MCP67 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at
atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM
UJ-861H, 1.50> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode
4, DMA mode 2 pciide0: channel 1 ignored (disabled)
azalia0 at pci0 dev 7 function 0 "NVIDIA MCP67 HD Audio" rev 0xa1: apic
2 int 10 azalia0: codecs: Conexant CX20549
audio0 at azalia0
ppb0 at pci0 dev 8 function 0 "NVIDIA MCP67 PCI" rev 0xa2
pci1 at ppb0 bus 2
"Ricoh 5C832 Firewire" rev 0x05 at pci1 dev 5 function 0 not configured
sdhc0 at pci1 dev 5 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
int 11 sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci1 dev 5 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci1 dev 5 function 3 not
configured "Ricoh 5C852 xD" rev 0x12 at pci1 dev 5 function 4 not
configured pciide1 at pci0 dev 9 function 0 "NVIDIA MCP67 SATA" rev
0xa2: DMA pciide1: using apic 2 int 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HM321HI>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <WDC WD1200BEVS-60UST0>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
nfe0 at pci0 dev 10 function 0 "NVIDIA MCP67 LAN" rev 0xa2: apic 2 int
11, address 00:00:00:00:00:00 rlphy0 at nfe0 phy 1: RTL8201L 10/100
PHY, rev. 1 ppb1 at pci0 dev 12 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci2 at ppb1 bus 4
ppb2 at pci0 dev 13 function 0 "NVIDIA MCP67 PCIE" rev 0xa2
pci3 at ppb2 bus 3
"Broadcom BCM4311" rev 0x02 at pci3 dev 0 function 0 not configured
vga1 at pci0 dev 18 function 0 vendor "NVIDIA", unknown product 0x0531
rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev BH-G1 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 2 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. HP Webcam" rev 2.00/6.06 addr 2 video0 at uvideo0
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/27.20 addr 2 uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 5 configuration 1 interface 0 "vendor 0x145f
Trust Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 5 configuration 1 interface 1 "vendor 0x145f
Trust Keyboard" rev 2.00/1.00 addr 3 uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (6efc545957b69a15.a) swap on wd0b dump on wd0b
