Hi all,
Upgraded from 5.2 to 5.3 i386, using my usual config I've had for a
number of years. Unfortunately I cannot ping6 a single thing, not even
localhost, and bgpd (patched with the March 15th patch) won't start via
rc.conf.local (all other daemons work). I've tried reinstalling the
kernel from a different mirror, troubleshooting with aiccu, and can't
find any real reason for this. Up till now this configuration worked
just fine, never a hitch (over a number of years). Hopefully someone has
a suggestion?
Cheers,
Noth
See below for dmesg, aiccu test, netstat -rn & sysctl -a | grep inet6
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC
real mem = 3471089664 (3310MB)
avail mem = 3403386880 (3245MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/23/12, SMBIOS rev. 2.7 @
0xceebd000 (28 entries)
bios0: vendor Intel Corp. version "CCCDT10N.86A.0032.2012.0323.1510"
date 03/23/2012
bios0: Intel Corporation D2500CC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC MCFG HPET
acpi0: wakeup devices SLT1(S4) PS2M(S4) PS2K(S4) UAR1(S3) UAR2(S3)
UAR3(S4) UAR4(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB7(S3) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xf400!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Atom D2000/N2000 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel Atom D2000/N2000 Video" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 8 int
16
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:22:4d:88:5c:4f
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 8 int
17
pci2 at ppb1 bus 1
em1 at pci2 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:22:4d:88:5c:52
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 8 int
23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 8 int
19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 8 int
18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 8 int
16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 8 int
23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI
1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD10JPVT-22A, 01.0> SCSI3
0/direct fixed naa.50014ee6ad7915f1
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10JPVT-22A, 01.0> SCSI3
0/direct fixed naa.50014ee65823f816
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 8
int 19
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627DHG
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627UHG rev 0x32
lm2 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
lm1: disabling sensors due to alias with lm2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech
USB Keyboard" rev 1.10/28.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd2: 931338MB, 512 bytes/sector, 1907380720 sectors
root on sd0a (f4957e152fc76b0f.a) swap on sd0b dump on sd0b
# aiccu test
Tunnel Information for T30693:
POP Id : chzrh02
IPv6 Local : 2001:1620:f00:56::2/64
IPv6 Remote : 2001:1620:f00:56::1/64
Tunnel Type : 6in4-heartbeat
Adminstate : enabled
Userstate : enabled
ifconfig: SIOCAIFADDR: File exists
route: writing to routing socket: File exists
add net default: gateway 2001:1620:f00:56::1: File exists
#######
####### AICCU Quick Connectivity Test
#######
####### [1/8] Ping the IPv4 Local/Your Outer Endpoint (85.218.24.18)
### This should return so called 'echo replies'
### If it doesn't then check your firewall settings
### Your local endpoint should always be pingable
### It could also indicate problems with your IPv4 stack
PING 85.218.24.18 (85.218.24.18): 56 data bytes
64 bytes from 85.218.24.18: icmp_seq=0 ttl=255 time=0.202 ms
64 bytes from 85.218.24.18: icmp_seq=1 ttl=255 time=0.078 ms
64 bytes from 85.218.24.18: icmp_seq=2 ttl=255 time=0.080 ms
--- 85.218.24.18 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.078/0.120/0.202/0.057 ms
######
Did this work? [Y/n]
####### [2/8] Ping the IPv4 Remote/PoP Outer Endpoint (213.144.148.74)
### These pings should reach the PoP and come back to you
### In case there are problems along the route between your
### host and the PoP this could not return replies
### Check your firewall settings if problems occur
PING 213.144.148.74 (213.144.148.74): 56 data bytes
64 bytes from 213.144.148.74: icmp_seq=0 ttl=53 time=17.141 ms
64 bytes from 213.144.148.74: icmp_seq=1 ttl=53 time=13.464 ms
64 bytes from 213.144.148.74: icmp_seq=2 ttl=53 time=12.887 ms
--- 213.144.148.74 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 12.887/14.497/17.141/1.886 ms
######
Did this work? [Y/n]
####### [3/8] Traceroute to the PoP (213.144.148.74) over IPv4
### This traceroute should reach the PoP
### In case this traceroute fails then you have no connectivity
### to the PoP and this is most probably the problem
traceroute to 213.144.148.74 (213.144.148.74), 64 hops max, 40 byte
packets
1 192.168.0.1 (192.168.0.1) 0.452 ms 0.227 ms 0.187 ms
2 85-218-24-1.dclient.lsne.ch (85.218.24.1) 11.162 ms 9.112 ms
9.720 ms
3 85.218.127.62 (85.218.127.62) 11.223 ms 19.309 ms 10.279 ms
4 v640.agr2.boi.lsne.ch (85.218.127.184) 9.153 ms 9.31 ms 11.182 ms
5 v600.cor1.boi.lsne.ch (85.218.127.49) 9.745 ms 7.526 ms 10.941 ms
6 te0-1-0-v301.brd0.gva.lsne.ch (85.218.127.98) 8.257 ms 10.514 ms
8.694 ms
7 r1gva1.core.init7.net (77.109.134.13) 8.834 ms 10.454 ms 8.536 ms
8 r1gva3.core.init7.net (77.109.128.62) 8.370 ms 13.973 ms 9.883 ms
9 r1qls1.core.init7.net (77.109.128.65) 12.585 ms 10.861 ms 9.948
ms
10 r1ber1.core.init7.net (77.109.128.181) 11.43 ms 14.782 ms 10.186
ms
11 r1zba1.core.init7.net (77.109.128.173) 11.921 ms 22.6 ms 12.307
ms
12 r1zlz1.core.init7.net (77.109.128.229) 17.386 ms 13.428 ms 18.464
ms
13 chzrh02.sixxs.net (213.144.148.74) 14.745 ms 14.990 ms 12.385 ms
######
Did this work? [Y/n]
###### [4/8] Checking if we can ping IPv6 localhost (::1)
### This confirms if your IPv6 is working
### If ::1 doesn't reply then something is wrong with your IPv6 stack
PING6(56=40+8+8 bytes) ::1 --> ::1
ping6: sendmsg: No route to host
ping6: wrote ::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote ::1 16 chars, ret=-1
ping6: sendmsg: No route to host
ping6: wrote ::1 16 chars, ret=-1
--- ::1 ping6 statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
######
Did this work? [Y/n] n
# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio
Iface
default 85.218.24.1 UGS 8 5141 - 8
em1
85.218.24/24 link#2 UC 2 0 - 4
em1
85.218.24.1 00:17:10:03:d0:d3 UHLc 1 0 - 4
em1
85.218.24.18 127.0.0.1 UG 0 3 33196 56
lo0
85.218.24.255 link#2 UHLc 2 55 - 4
em1
127/8 127.0.0.1 UGRS 0 0 33196 8
lo0
127.0.0.1 127.0.0.1 UH 4 648 33196 4
lo0
192.168.10/24 192.168.10.2 UGS 0 0 - 8
tun1
192.168.10.2 192.168.10.1 UH 1 0 - 4
tun1
192.168.11/24 link#10 UC 3 0 - 4
tun2
192.168.11.2 fe:e1:ba:d9:cd:92 UHLc 5 64 - 4
tun2
192.168.11.3 link#10 UHLc 0 4 - 4
tun2
192.168.11.255 link#10 UHLc 2 51 - 4
tun2
192.168.12/24 link#11 UC 3 0 - 4
tun3
192.168.12/24 192.168.11.2 UG 0 0 - 48
tun2
192.168.12.1 fe:e1:ba:d3:ac:2c UHLc 1 64 - 4
tun3
192.168.12.8 link#11 UHLc 0 4 - 4
tun3
192.168.12.255 link#11 UHLc 2 51 - 4
tun3
192.168.30/24 192.168.11.2 UG 0 675 - 48
tun2
192.168.31/24 192.168.11.2 UG 0 0 - 48
tun2
192.168.50/24 link#1 UC 4 0 - 4
em0
192.168.50.1 00:22:4d:88:5c:4f UHLc 1 178 - 4
lo0
192.168.50.9 78:dd:08:f7:73:75 UHLc 2 3401 - 4
em0
192.168.50.13 98:4b:4a:51:eb:a2 UHLc 0 233 - 4
em0
192.168.50.255 link#1 UHLc 2 55 - 4
em0
224/4 127.0.0.1 URS 0 0 33196 8
lo0
Internet6:
Destination Gateway Flags
Refs Use Mtu Prio Iface
::/104 ::1 UGRS
0 0 - 8 lo0
::/96 ::1 UGRS
0 0 - 8 lo0
default 2001:1620:f00:56::1 GS
0 0 - 8 gif0
::1 ::1 UH
14 0 33196 4 lo0
::127.0.0.0/104 ::1 UGRS
0 0 - 8 lo0
::224.0.0.0/100 ::1 UGRS
0 0 - 8 lo0
::255.0.0.0/104 ::1 UGRS
0 0 - 8 lo0
::ffff:0.0.0.0/96 ::1 UGRS
0 0 - 8 lo0
2001:1620:f00:56::1 2001:1620:f00:56::2 H
1 0 - 4 gif0
2001:1620:f00:56::2 link#8 UHL
0 0 - 4 lo0
2001:1620:f2e:1::/64 link#1 UC
0 0 - 4 em0
2002::/24 ::1 UGRS
0 0 - 8 lo0
2002:7f00::/24 ::1 UGRS
0 0 - 8 lo0
2002:e000::/20 ::1 UGRS
0 0 - 8 lo0
2002:ff00::/24 ::1 UGRS
0 0 - 8 lo0
fe80::/10 ::1 UGRS
0 0 - 8 lo0
fe80::%em0/64 link#1 UC
0 0 - 4 em0
fe80::%em1/64 link#2 UC
0 0 - 4 em1
fe80::%lo0/64 fe80::1%lo0 U
0 0 - 4 lo0
fe80::1%lo0 link#4 UHL
0 0 - 4 lo0
fe80::%gif0/64 link#8 C
0 0 - 4 gif0
fe80::222:4dff:fe88:5c4f%gif0 link#8 UHL
0 0 - 4 lo0
fe80::%tun2/64 link#10 UC
0 0 - 4 tun2
fe80::fce1:baff:fed4:f868%tun2 fe:e1:ba:d4:f8:68 HL
0 0 - 4 lo0
fe80::%tun3/64 link#11 UC
0 0 - 4 tun3
fe80::fce1:baff:fed6:d687%tun3 fe:e1:ba:d6:d6:87 HL
0 0 - 4 lo0
fec0::/10 ::1 UGRS
0 0 - 8 lo0
ff01::/16 ::1 UGRS
0 0 - 8 lo0
ff01::%em0/32 link#1 UC
0 0 - 4 em0
ff01::%em1/32 link#2 UC
0 0 - 4 em1
ff01::%lo0/32 fe80::1%lo0 UC
0 0 - 4 lo0
ff01::%gif0/32 link#8 C
0 0 - 4 gif0
ff01::%tun2/32 link#10 UC
0 0 - 4 tun2
ff01::%tun3/32 link#11 UC
0 0 - 4 tun3
ff02::/16 ::1 UGRS
4 0 - 8 lo0
ff02::%em0/32 link#1 UC
0 0 - 4 em0
ff02::%em1/32 link#2 UC
0 0 - 4 em1
ff02::%lo0/32 fe80::1%lo0 UC
0 0 - 4 lo0
ff02::%gif0/32 link#8 C
0 0 - 4 gif0
ff02::%tun2/32 link#10 UC
0 0 - 4 tun2
ff02::%tun3/32 link#11 UC
0 0 - 4 tun3
Encap:
Source Port Destination Port Proto
SA(Address/Proto/Type/Direction)
default 0 default
0 0 none/esp/deny/out
# sysctl -a | grep inet6
net.inet6.ip6.forwarding=1
net.inet6.ip6.redirect=1
net.inet6.ip6.hlim=64
net.inet6.ip6.mrtproto=103
net.inet6.ip6.maxfragpackets=200
net.inet6.ip6.accept_rtadv=0
net.inet6.ip6.keepfaith=0
net.inet6.ip6.log_interval=5
net.inet6.ip6.hdrnestlimit=10
net.inet6.ip6.dad_count=1
net.inet6.ip6.auto_flowlabel=1
net.inet6.ip6.defmcasthlim=1
net.inet6.ip6.kame_version=OpenBSD-current
net.inet6.ip6.use_deprecated=1
net.inet6.ip6.rr_prune=5
net.inet6.ip6.v6only=1
net.inet6.ip6.maxfrags=200
net.inet6.ip6.mforwarding=1
net.inet6.ip6.multipath=0
net.inet6.ip6.multicast_mtudisc=0
net.inet6.ip6.neighborgcthresh=2048
net.inet6.ip6.maxifprefixes=16
net.inet6.ip6.maxifdefrouters=16
net.inet6.ip6.maxdynroutes=4096
net.inet6.ip6.dad_pending=0
net.inet6.icmp6.rediraccept=0
net.inet6.icmp6.redirtimeout=600
net.inet6.icmp6.nd6_prune=1
net.inet6.icmp6.nd6_delay=5
net.inet6.icmp6.nd6_umaxtries=3
net.inet6.icmp6.nd6_mmaxtries=3
net.inet6.icmp6.nd6_useloopback=1
net.inet6.icmp6.nodeinfo=1
net.inet6.icmp6.errppslimit=100
net.inet6.icmp6.nd6_maxnudhint=0
net.inet6.icmp6.mtudisc_hiwat=1280
net.inet6.icmp6.mtudisc_lowat=256
net.inet6.icmp6.nd6_debug=0
net.inet6.divert.recvspace=65636
net.inet6.divert.sendspace=65636
