forgot to add the link for a little demo: http://bibi.ca/download/machinekit/machinekit-wb.mp4
same demo as animated gif version if you prefer that http://bibi.ca/download/machinekit/machinekit-wb.gif On Fri, 15 Nov 2019 21:10:44 -0800 markus <[email protected]> wrote: > I don't know how many here use FreeCAD for their CAD and/or CAM work. > In case you do or are planning to, I started writing a workbench which > basically is a (simple) Machinekit UI embedded in FreeCAD. > > It is far from complete but it has become quite useful to me. > Everything I machine is practically a one off, and being able to > directly push the job, setup/touch off the tool and execute the task > from FreeCAD has streamlined my workflow. Most of all, I find seeing > the live feedback of the tool in relation to the model and g-code > extremely helpful. > > Besides, it was/is a lot of fun to reverse engineer the different > services and interact with them :) > > In case you're interested, the workbench is on github: > https://github.com/mlampert/Machinekit-Workbench > > Comments and feedback are welcome. > > Cheers, > Markus -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/20191115221345.677f011a%40yolanda.
