I'm wondering if there is a way to use the machinekitclient live coding feature with a DExx mksocfpga setup, ie: running machinekit on the soc and MK-Client on a pc ?
I have so far looked at: QtQuickVcp QML Live Coding with MachinekitClient <https://groups.google.com/forum/#!msg/machinekit/ylnHOwrfN98/fAwKSxixCgAJ;context-place=forum/machinek> video in thread and also https://machinekoder.com/qt-qml-live-coding-for-everyone/ Without finding other out than it works fine if you run the gui on your local computer. My usual workflow (for customizing Cetus) is to edit the files on the remote client (via ftp), and then save --> restart machinekit client (then wait 15 secs for it to load again if errorfree). I'm hoping to find a way to get rid of that 12-15 sec lag between edits. Running machinekit on my PC is not a good option as the hal will be connected to mesa cores running on the socfpga (a custom dbspi component). Best wishes Michael B. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/f0d59b2b-5aa3-4c83-b950-6b3686fbc6c3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
