Re: [Machinekit] Re: bone-debian-9.6-machinekit-armhf-2018-12-10-4gb.img machinekit not starting

[schoone...@gmail.com]

libGL error: No matching fbConfigs or visuals found libGL error: failed to load driver: swrast The problem is still X forwarding, now specifically GL The axis GUI uses a libGL derivative opengl. Either your BBB or the accessing computer must provide that. You can get the forwarding to use the accessing computers libraries  using something like export LIBGL_ALWAYS_SOFTWARE=1 but it is far easier to install the required libs on the remote computer. Since your BBB did not have an X server, it will not have had libgl installed apt-get update && apt-get install libgl1-mesa-dev libglu1-mesa-dev freeglut3-dev should pull all the required libs, try that, beyond that search engines are your friend, this is a common problem using remote access and nothing to do with machinekit   On 26/12/18 07:51, Bas de Bruijn wrote: On 25 Dec 2018, at 23:59, mugginsac <muggin...@gmail.com> wrote: So when I run "machinekit Xylotex.ini"  I see the machinekit logo and then it displays the axis window but immediately hides it (it is so fast that I can't even tell if it is fully drawing the contents. The axis window shows up in the XWindow windows list but I can't get it to re-display. The console looks like it is just waiting for the load process to finish but the only thing I can do is ^C to abort. Here is a link to my console_output Last 2 lines talk of an error. There’s your starting point. Looks like your setup is finished and started to unload when you pressed CTRL+C Bas Here is a link to my /var/log/linuxcnc.log (It is front trucated because it is too long for my console's scrollback). And here is a link to my dmesg_output -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.