Great work! Can you please also push the config to https://github.com/machinekit/machinekit/tree/master/configs/ARM/ for other people as a reference?
Am Samstag, 24. März 2018 09:52:43 UTC+1 schrieb Karl Jacobs: > > If anyone is interested, I forked and adapted the machinekit-replicape > config written by Sam Wong on > https://github.com/sam0737/machinekit-replicape > to Debian Stretch and kernel 4.14.x. on a BeagleBoneBlack. You can find it > on https://github.com/airborneastro/machinekit-replicape > The config supports velocity extrusion mode only. > I added support for delta printers (lineardeltakins), M106 fan > functionality, M710 filament jog etc. > I tested it with the B3A board revision and my Kossel Mini printer. From > Sam Wong's original version, the config should also support > CoreXY and cartesian geometries and should also work for board revision > A4A, all untested. > My repository on github has a fairly extensive README that should get you > going even from scratch. > Many posts in this forum were very helpful in getting things to work. > Thanks for that! > Regards, > Karl > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
