Thanks, It looks like it will cost about $52 for 3 boards with 1206 resistors and caps.
Alan On Thursday, December 21, 2017 at 4:24:08 PM UTC-8, Charles Steinkuehler wrote: > > On 12/21/2017 5:39 PM, mugginsac wrote: > > I have discovered that my hand are not steady enough to hand solder 0603 > > parts. I bought three of the boards of Charles design and have two new > > boards left, if anyone is interested. They cost me about $14 a piece. > One > > board has 3 capacitors soldered on but nothing more. > > > > I am thinking about redoing the board to use 1206 resistors and caps.I > have > > been able to successfully hand solder boards with 1206 parts. It will be > a > > little more expensive because I will have to make the board a little > larger > > to accommodate the 1206 parts. > > Sorry about that! > > At least I migrated away from the resistor packs. If you think the > 0603 parts are hard to solder, you definitely don't want to be > soldering these (from the 1.0 version of CRAMPS): > > http://reprap.org/wiki/File:CRAMPS_V1v0_10k_rn.jpg > > :) > > -- > Charles Steinkuehler > [email protected] <javascript:> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
