On 12/21/2017 5:39 PM, mugginsac wrote: > I have discovered that my hand are not steady enough to hand solder 0603 > parts. I bought three of the boards of Charles design and have two new > boards left, if anyone is interested. They cost me about $14 a piece. One > board has 3 capacitors soldered on but nothing more. > > I am thinking about redoing the board to use 1206 resistors and caps.I have > been able to successfully hand solder boards with 1206 parts. It will be a > little more expensive because I will have to make the board a little larger > to accommodate the 1206 parts.
Sorry about that! At least I migrated away from the resistor packs. If you think the 0603 parts are hard to solder, you definitely don't want to be soldering these (from the 1.0 version of CRAMPS): http://reprap.org/wiki/File:CRAMPS_V1v0_10k_rn.jpg :) -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
