As I did promise to return with my findings and report back when my Cyclone V partial reconfiguration quest had meet an conclusion I am not happy to verdict that is is true that it does work and that it is true that it does also not work "out of the box".
Until the license for incremental compilation and the pr core is open licensed, I will stick to consensus on the web of not placing any guide describing how to get it to work on Cyclone V with the linux dts overlay method. I have instead chosen to share the steps needed in the shared folder available and let those that are benevolently curious, investigative and open minded for open source hardware, fetch/grab the shared file and go look see what they would have to say if they deducted such easily fixable creative omissions themself. Leading to the "It dosn't work" statement above that fueled and kicked my relentless truth based intuitive guidance system into me having to provide verification of everything works if you know how to fix the omissions. What remains is that: Until such functionality is UNlicensed partial reconfiguration is unavailable for open hardware or source development contributors. "It dosnt work" --> mythbusted :-) Now whats that about an open sourced hardware society as the next evolutionary step ? On Sunday, 3 September 2017 06:27:26 UTC+2, Michael Brown wrote: > > Yes, I agree. > > On Sun, 3 Sep 2017 at 05.33, mugginsac <[email protected]> wrote: > >> Michael, >> >> It seemed to take forever to write, but eventually using dd the image >> wrote to the uSD and it boots. >> >> I am in agreement with you that having the hdmi for local maintenance is >> a good idea. I have never tried to run 3D graphics on one of these small >> "card" computers. I think running linuxcnc or machinekit via ssh makes a >> lot of sense. >> >> Thanks, >> Alan >> >> >> >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
