Just for those interested It is possible to test out the tmc2130 with the newly added DE10 / DE0 _Cramps soc configs. Demo sd_Image link in this thread: https://groups.google.com/forum/#!topic/machinekit/BPRQpoyvFm8
Setup guide: https://drive.google.com/open?id=0BwyLvgyVIdi8RXI0V21WOGk0eTA As of now there is only a schematic of the DE0 / DE10 / Terasic gpio --> Cramps I/O board online: https://github.com/the-snowwhite/socfpga-kicad/tree/master/Cramps2nano-soc Commits for adding a pcb layout are very welcome :-) On Friday, 1 September 2017 14:32:00 UTC+2, Michael Brown wrote: > > The tmc2100 / 2130 run nice and silently with the new _CRAMPS bitfiles (In > the CRAMPS board @ 24V) > > The mksocfpga's can deliver a much higher step frequency so it is possible > to utilize the 256 step mode on the tmc2130. > > But how about this ?: > Trinamic stallGuard2™ and coolStep™ > > https://youtu.be/Prw7wNa20Gk > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
