Hi Grant, John Bonesio is working with Montavista to get these problems solved.
Thanks, John > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-embedded- > [EMAIL PROTECTED] On Behalf Of Grant Likely > Sent: Thursday, July 31, 2008 8:34 PM > To: Naresh Bhat > Cc: [email protected] > Subject: Re: Board is not booting - Please Help me > > On Wed, Jul 30, 2008 at 01:14:52PM +0530, Naresh Bhat wrote: > > Hi Guys > > I have ML507 board. By using "ml507_bsb_design_ppc440.zip" > > I have created the "Base System Builder" project and also > > > > I am able to create the following files sucessfully. > > > > 1. My own "DTS" file (attached with the mail) > > 2. My own "download.bit" file > > 3. My own ACE file. (Used the Montavista Pro 5.0 kernel., Kernel is compiled > > with ARCH=powerpc, CROSS_COMPILE=ppc_440-, used the ml507_defconfig) > > Unfortunately, I'm not able to help much with the Montavista kernel > since I don't know anything about which version it is based on. Have > you tried using the current mainline kernel source or Xilinx's published > git repo? > > To use mainline, try copying your .dts file to > arch/powerpc/boot/dts/virtex440-myml507.dts and then build the kernel > with 'make simpleImage.virtex440-myml507' > > g. > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
