On Wed, Jul 30, 2008 at 01:14:52PM +0530, Naresh Bhat wrote: > Hi Guys > I have ML507 board. By using "ml507_bsb_design_ppc440.zip" > I have created the "Base System Builder" project and also > > I am able to create the following files sucessfully. > > 1. My own "DTS" file (attached with the mail) > 2. My own "download.bit" file > 3. My own ACE file. (Used the Montavista Pro 5.0 kernel., Kernel is compiled > with ARCH=powerpc, CROSS_COMPILE=ppc_440-, used the ml507_defconfig)
Unfortunately, I'm not able to help much with the Montavista kernel since I don't know anything about which version it is based on. Have you tried using the current mainline kernel source or Xilinx's published git repo? To use mainline, try copying your .dts file to arch/powerpc/boot/dts/virtex440-myml507.dts and then build the kernel with 'make simpleImage.virtex440-myml507' g. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
