Hi Matthias, You might want to try the "quick start" section of http://www.246tnt.com/mpc52xx/
The last compile I tried worked just fine ... You just needed to be sure CONFIG_NET is enabled (even if you don't use network ... the issue is known and being taken care of, I've seen some posts of Russel King and Andrew Morton about it). If it still doesnt work, report it and I'll have a closer look. Maybe something changed recently and I didn't update my tree since a few days ... Sylvain John Rigby wrote: > Sorry I'm not sure what the state of 5200 support in the eldk. I know > that Wolfgang > has said that 2.6 is not supported though. You may want to try out > Sylvains > kernel: http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git > > You can search in list for Syvains instructions on how to use it. > > > On 3/28/06, *Matthias Fechner* <idefix at fechner.net > <mailto:idefix at fechner.net>> wrote: > > Hello John, > > * John Rigby <jcrigby at gmail.com <mailto:jcrigby at gmail.com>> > [27-03-06 18:01]: > > try make lite5200_defconfig instead of copying it to .config > > or make oldconfig after copying ti to .config > > I tried now several combinations with: > make ARCH=ppc CROSS_COMPILE=ppc_6xx- lite5200_defconfig > make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage > > then coping the file to .config and > make ARCH=ppc CROSS_COMPILE=ppc_6xx- oldconfig > make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage > > but it always leads to the same error message... > > Best regards, > Matthias > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org <mailto:Linuxppc-embedded at ozlabs.org> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
