try make lite5200_defconfig instead of copying it to .config or make oldconfig after copying ti to .config
On 3/27/06, Matthias Fechner <idefix at fechner.net> wrote: > > Hi, > > I installed today ELDK 4.0 for the LITE5200 board (icecube). > ./install -d /usr/local/eldk ppc_6xx > > After compiling u-boot and playing a little bit with it, i tried to > compile the kernel 2.6. > > For this I used the git repository. > I copied the file arch/ppc/configs/lite5200_defconfig to .config, and > tried the following one: > make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage > > But i got a failure with the following error message: > CC arch/ppc/syslib/bestcomm/bestcomm.o > arch/ppc/syslib/bestcomm/bestcomm.c: In function 'mpc52xx_sdma_probe': > arch/ppc/syslib/bestcomm/bestcomm.c:269: warning: implicit declaration of > function 'to_platform_device' > arch/ppc/syslib/bestcomm/bestcomm.c:269: warning: initialization makes > pointer from integer without a cast > arch/ppc/syslib/bestcomm/bestcomm.c:278: warning: implicit declaration of > function 'platform_get_resource' > arch/ppc/syslib/bestcomm/bestcomm.c:278: warning: assignment makes pointer > from integer without a cast > arch/ppc/syslib/bestcomm/bestcomm.c:279: warning: assignment makes pointer > from integer without a cast > arch/ppc/syslib/bestcomm/bestcomm.c: At top level: > arch/ppc/syslib/bestcomm/bestcomm.c:367: error: 'platform_bus_type' > undeclared here (not in a function) > make[2]: *** [arch/ppc/syslib/bestcomm/bestcomm.o] Fehler 1 > make[1]: *** [arch/ppc/syslib/bestcomm] Fehler 2 > make: *** [arch/ppc/syslib] Fehler 2 > > What is wrong here, I think i did an error on any step... > > Thx for help! > > Best regards, > Matthias > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060327/287f46e2/attachment.htm
