In message <[EMAIL PROTECTED]> you wrote: > > I was just using the elf image, instead of uimage. > '6501A8C0.img' is refereing zImage.img which is Linux elf image. > It looks to me that the bootelf command interprets ELF format corrently.
You shoulkd really read the documentation. bootelf is not the correct command to boot a Linux kernel image, and the ELF file is not the correct image to use. Also, "6501A8C0.img" means you fell back to using the encoded IP address of yoru target as file name because you failed to provide a valid image name. Again, I strongly recommend to read the fine manual. > On 3/23/07, Stefan Roese <[EMAIL PROTECTED]> wrote: [Full quote deleted.] Please don't top post / full quote. Read http://www.netmeister.org/news/learn2quote.html Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] HEALTH WARNING: Care Should Be Taken When Lifting This Product, Since Its Mass, and Thus Its Weight, Is Dependent on Its Velocity Relative to the User. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
