Ken, On Friday 23 March 2007 19:45, Ken Sakurai wrote: > > I don't know the AVNET 440GX eval board. Is it _identical_ to the > > IBM/AMCC Ocotea? If not you will most likely have no luck with this > > image. You will have to port Linux to this special board. > > yeah, sounds like. I was so optimistic that Linux is kind of primary OS for > any ppc board when I choosed this board :-) > > I was just using the elf image, instead of uimage. > '6501A8C0.img' is refereing zImage.img which is Linux elf image. > It looks to me that the bootelf command interprets ELF format corrently. > > As you sugested, I also made uImage and used bootm to boot it. > But no luck. Here is the log.
Of course you had no luck, since the Ocotea uImage can't work on a different hardware like the AVNET board. Again, you have to port Linux to this platform first. And you need to know detailed information for this procedure (schematics...). Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany ===================================================================== _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
