On Sat, 2017-01-14 at 02:06 +0000, Andre Przywara wrote: > Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, > from > which the board can actually boot from. > Enable the SPL support for the SPI controller and SPI flash to allow > putting the SPL, the DT and U-Boot proper into there. This will let > a board boot without an SD card inserted. > The flash chip can be written with a version of the sunxi-fel tool.
Thanks, I had this one in my queue :) > > Signed-off-by: Andre Przywara <[email protected]> Tested-by: Priit Laes <[email protected]> > --- > configs/orangepi_zero_defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/configs/orangepi_zero_defconfig > b/configs/orangepi_zero_defconfig > index 8813927..abb3fcf 100644 > --- a/configs/orangepi_zero_defconfig > +++ b/configs/orangepi_zero_defconfig > @@ -13,3 +13,5 @@ CONFIG_SPL=y > # CONFIG_CMD_FPGA is not set > CONFIG_SUN8I_EMAC=y > CONFIG_USB_EHCI_HCD=y > +CONFIG_SPL_SPI_SUNXI=y > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > -- > 2.8.2 > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
