Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from which the board can actually boot from. Enable the SPL support for the SPI controller and SPI flash to allow putting the SPL, the DT and U-Boot proper into there. This will let a board boot without an SD card inserted. The flash chip can be written with a version of the sunxi-fel tool.
Signed-off-by: Andre Przywara <[email protected]> --- configs/orangepi_zero_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig index 8813927..abb3fcf 100644 --- a/configs/orangepi_zero_defconfig +++ b/configs/orangepi_zero_defconfig @@ -13,3 +13,5 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y +CONFIG_SPL_SPI_SUNXI=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y -- 2.8.2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
