El viernes, 14 de febrero de 2014 19:00:39 UTC+1, Marcos Cruz escribió: > Hi, > > > > > This is a digital signage board based on A20 SoC, here the website: > http://www.merrii.com/en/detail.asp?id=157 > I managed to modify and install the Cubian distribution to function on it > but > I'm having problems with its VGA and HDMI outputs (no signal). > The file dmesg_output contains the kernel output. > What is curious about the board is I had to modify script.fex file in > order to make > the built in rtl8188etv operational but with the Android that comes > pre-installed everything works. > Have anyone any idea about the VGA and HDMI outputs? > > > > > Regards, > > > > > Marcos
Hi Marcos, we are struggling with Merrii M2 board, and we have managed to install a debian to boot from SD, but we are not able to power up the usb hub, neither the rtl8188etv that is also connected to an usb as well. We have been playing with fex file, and even trying to do some electrical reverse engineering to the board (We have found a transistor that should power the 5V power to usb hub and sata power connector with a 20 GPIO pin, but we have no clue about which A20 GPIO should commute it). Could you please give us more info about the changes you made on the FEX to activate the rtl8188etv, and with which (a link will be very wellcome) kernel an config has you installed the cubian. Thnak you in advanced. Kind regards. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
