Hi Harry, For me, work this:
rmmod sunxi_gmac.ko <http://sunxi_emac.ko/> and insmod sunxi_emac.ko Regards, Fabiano. Em quarta-feira, 10 de setembro de 2014 06h20min42s UTC-3, harry escreveu: > > Hi Antonio, > are you able to get the SATA and ETHERNET working on this board?? can you > please send some information on this. i shall be thankful. > regards > harry > > On Wednesday, March 19, 2014 12:55:03 AM UTC+5:30, [email protected] > wrote: > > Hi Marcos, > > > > > > I get my boards booting with a Linaro and with HDMI output. I think that > the problem is in your FEX file configuration. You have configured the > output type to LCD and not HDMI. > > > > > > Change the values of the following parameters to the values below, > regenerated your script.bin and try again : > > > > > > > > [disp_init] > > disp_init_enable = 1 > > disp_mode = 0 > > screen0_output_type = 3 > > screen0_output_mode = 4 > > screen1_output_type = 0 > > screen1_output_mode = 4 > > > > > > Reference : http://linux-sunxi.org/Fex_Guide#disp_init_configuration > > > > > > Now I am working on the ethernet and SATA drivers. > > > > > > Regards, > > Antonio Belloni > > > > > > > > Em sexta-feira, 14 de fevereiro de 2014 16h00min39s UTC-2, Marcos Cruz > escreveu: > > > > Hi, > > > > > > > > > > This is a digital signage board based on A20 SoC, here the website: > > http://www.merrii.com/en/detail.asp?id=157 > > I managed to modify and install the Cubian distribution to function > on it but > > I'm having problems with its VGA and HDMI outputs (no signal). > > The file dmesg_output contains the kernel output. > > What is curious about the board is I had to modify script.fex file > in order to make > > the built in rtl8188etv operational but with the Android that comes > pre-installed everything works. > > Have anyone any idea about the VGA and HDMI outputs? > > > > > > > > > > Regards, > > > > > > > > > > Marcos > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
