Hi Vineet,
> -----Original Message-----
> From: Vineet Gupta
> Sent: Monday, January 16, 2017 11:58 PM
> To: linux-snps-arc@lists.infradead.org; Alexey Brodkin
> <abrod...@synopsys.com>
> Cc: linux-ker...@vger.kernel.org; Vineet Gupta <vgu...@synopsys.com>
> Subject: [PATCH 4/4] ARCv2: smp-boot: MCIP: use Inter-Core-Debug unit to
> kick start non master cpus
>
> This essentially converts a run-on-reset to halt-on-reset - so non masters
> self
> halt in early boot code. And later they are resumed from halted PC using
> MCIP ICD assist.
>
> As mentioned in prev commits, this paves way for radio silence on coherency
> unit, while master is setting up IOC and such.
>
> Signed-off-by: Vineet Gupta <vgu...@synopsys.com>
> ---
> arch/arc/include/asm/mcip.h | 1 +
> arch/arc/kernel/mcip.c | 31 +++++++++++++++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h
> index c8fbe4114bad..a6ae4363c388 100644
> --- a/arch/arc/include/asm/mcip.h
> +++ b/arch/arc/include/asm/mcip.h
> @@ -36,6 +36,7 @@ struct mcip_cmd {
> #define CMD_SEMA_CLAIM_AND_READ 0x11
> #define CMD_SEMA_RELEASE 0x12
>
> +#define CMD_DEBUG_RUN 0x33
> #define CMD_DEBUG_SET_MASK 0x34
> #define CMD_DEBUG_SET_SELECT 0x36
>
> diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index
> 933382e0edd0..0a1822d2fe52 100644
> --- a/arch/arc/kernel/mcip.c
> +++ b/arch/arc/kernel/mcip.c
> @@ -103,12 +103,43 @@ static void mcip_probe_n_setup(void)
> cpuinfo_arc700[0].extn.gfrc = mp.gfrc; }
>
> +static void __init mcip_cpu_wait(int cpu) {
Has this one passed checkpatch? Above "{" on the same line as function name
and closing one merged with the previous line look strange.
At least here it is said that way:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst#n129
> + struct mcip_bcr mp;
> +
> + READ_BCR(ARC_REG_MCIP_BCR, mp);
> +
> + /*
> + * self halt for waiting as Master will resume us using MCIP ICD assist
> + * Note: if ICD is not configured, we are hosed, but panic here is
> + * not going to help as UART access might not even work
> + */
> + if (mp.dbg)
> + asm volatile("flag 1 \n");
Are you sure that won't trigger MDB stop?
I would imagine if MDB saw coreX running and then it unexpectedly [for MDB]
gets halted
MDB stops, no? Essentially I'm talking about properly set CPMD session.
I have no board handy ATM so just thinking out loud.
> +}
> +
> +static void __init mcip_cpu_kick(int cpu, unsigned long pc) {
> + struct mcip_bcr mp;
> +
> + READ_BCR(ARC_REG_MCIP_BCR, mp);
> +
> + if (mp.dbg)
> + __mcip_cmd_data(CMD_DEBUG_RUN, 0, (1 << cpu));
> + else
> + panic("SMP boot issues: MCIP lacks ICD\n"); }
> +
> struct plat_smp_ops plat_smp_ops = {
> .info = smp_cpuinfo_buf,
> .init_early_smp = mcip_probe_n_setup,
> .init_per_cpu = mcip_setup_per_cpu,
> .ipi_send = mcip_ipi_send,
> .ipi_clear = mcip_ipi_clear,
> + .cpu_kick = mcip_cpu_kick,
> +#ifndef CONFIG_ARC_SMP_HALT_ON_RESET
I really hate compile-time defined stuff and would prefer to remove most of that
stuff at least in ARC code instaed of adding more items that stops us from using
the same binary on wider range of ARC cores.
In 2/4 you already do check if core was configured [actually Linux kernel was
configured but not the HW]
-------------------------->8-------------------------
if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
-------------------------->8-------------------------
so "plat_smp_ops.cpu_wait(cpu)" won't be executed anyways.
> + .cpu_wait = mcip_cpu_wait,
> +#endif
> };
So why don't we implement it all much simpler regardless
CONFIG_ARC_SMP_HALT_ON_RESET?
Like that:
-------------------------->8-------------------------
static void __init mcip_cpu_wait(int cpu)
{
struct mcip_bcr mp;
/* Check if master has already set "wake_flag" wanting us to run */
if (wake_flag != cpu) { // or similar construction if we switch to
bitfield
READ_BCR(ARC_REG_MCIP_BCR, mp);
/*
* self halt for waiting as Master will resume us using MCIP
ICD assist
* Note: if ICD is not configured, we are hosed, but panic here
is
* not going to help as UART access might not even work
*/
if (mp.dbg)
asm volatile("flag 1 \n");
}
}
-------------------------->8-------------------------
And I think we may then keep mcip_cpu_kick() as it is.
In ARConnect databook there's no mention of side-effects for CMD_DEBUG_RUN
being used
against already running core.
IMHO with this approach we'll be able to handle cases when [pre-]bootloader
inverted HALT/RUN_ON_RESET state.
-Alexey
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
