Thanks - I pulled the iDRAC modules from the box that had no video and was able to reset them on the current system. Firmware I have now is:
iDRAC 1.80.17 Lifecycle 1.5.1.57 I have the Lifecycle repair package, but cannot find the latest idrac firmware. Thanks On Fri, May 12, 2017 at 12:51 PM, <[email protected]> wrote: > hi, unknown of you particular FW versions for 11G servers a proven > sequence is > > 1. iDRAC FW via iDRAC GUI > > 2. LCC repair package via IDRAC GUI > > 3. BIOS update using method of your choice > > 4. if necessary LCC FW using method of your choice (repair package is not > always most recent) > > 5. update drivers if required > > 6. all other FWs > > > > ------------------------------ > *From:* linux-poweredge-bounces-Lists on behalf of Ricardo Stella < > [email protected]> > *Sent:* Friday, May 12, 2017 6:38 PM > *To:* linux-poweredge-Lists > *Subject:* [Linux-PowerEdge] Firmware upgrade method > > > Hi, > > while I still try to recover these R610 from a failed firmware upgrade, I > got a hold of an R710 which has RHEL 6.9 installed (just updated) but > firmware is very much old. > > Is there a preferred update method and or steps? I would do it via DSU, > but should I update something first before anything else? Box has iDRAC 6 > enterprise, and Perc H700. > > Thanks in advance. > > Ricardo. > > -- > °(((=((===°°°(((================================================ > -- °(((=((===°°°(((================================================
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
