Hi Chris,
On Fri, Jun 29, 2012 at 07:19:19PM -0400, Chris Ball wrote:
> Hi,
>
> On Fri, Jun 08 2012, [email protected] wrote:
> > From: Philip Rakity <[email protected]>
> >
> > If we are using a regulator the SD Host Controller and the
> > regulator should agree about the voltages supported. Use
> > the common subset that is supported.
> >
> > Signed-off-by: Philip Rakity <[email protected]>
>
> This breaks the build when CONFIG_REGULATOR=n -- I've applied what looks
> like the correct fix to me:
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index eae7c3c..caba999 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2832,51 +2832,53 @@ int sdhci_add_host(struct sdhci_host *host)
> +#ifdef CONFIG_REGULATOR
> /*
> * According to SD Host Controller spec v3.00, if the Host System
> * can afford more than 150mA, Host Driver should set XPC to 1. Also
> * the value is meaningful only if Voltage Support in the Capabilities
> * register is set. The actual current value is 4 times the register
> * value.
> */
The above comments does not belong to regulator code, it should be
placed on top of the max_current_caps variable like this:
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index caba999..f76736b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2845,13 +2845,6 @@ int sdhci_add_host(struct sdhci_host *host)
}
#ifdef CONFIG_REGULATOR
- /*
- * According to SD Host Controller spec v3.00, if the Host System
- * can afford more than 150mA, Host Driver should set XPC to 1. Also
- * the value is meaningful only if Voltage Support in the Capabilities
- * register is set. The actual current value is 4 times the register
- * value.
- */
if (host->vmmc) {
ret = regulator_is_supported_voltage(host->vmmc, 3300000,
3300000);
@@ -2868,6 +2861,13 @@ int sdhci_add_host(struct sdhci_host *host)
}
#endif /* CONFIG_REGULATOR */
+ /*
+ * According to SD Host Controller spec v3.00, if the Host System
+ * can afford more than 150mA, Host Driver should set XPC to 1. Also
+ * the value is meaningful only if Voltage Support in the Capabilities
+ * register is set. The actual current value is 4 times the register
+ * value.
+ */
max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
if (!max_current_caps && host->vmmc) {
u32 curr = regulator_get_current_limit(host->vmmc);
Thanks,
Aaron
> if (host->vmmc) {
> ret = regulator_is_supported_voltage(host->vmmc, 3300000,
> 3300000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
> caps[0] &= ~SDHCI_CAN_VDD_330;
> ret = regulator_is_supported_voltage(host->vmmc, 3000000,
> 3000000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
> caps[0] &= ~SDHCI_CAN_VDD_300;
> ret = regulator_is_supported_voltage(host->vmmc, 1800000,
> 1800000);
> if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
> caps[0] &= ~SDHCI_CAN_VDD_180;
> }
> +#endif /* CONFIG_REGULATOR */
>
> --
> Chris Ball <[email protected]> <http://printf.net/>
> One Laptop Per Child
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
