Hi,
On Fri, Jun 08 2012, [email protected] wrote:
> From: Philip Rakity <[email protected]>
>
> If we are using a regulator the SD Host Controller and the
> regulator should agree about the voltages supported. Use
> the common subset that is supported.
>
> Signed-off-by: Philip Rakity <[email protected]>
This breaks the build when CONFIG_REGULATOR=n -- I've applied what looks
like the correct fix to me:
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index eae7c3c..caba999 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2832,51 +2832,53 @@ int sdhci_add_host(struct sdhci_host *host)
+#ifdef CONFIG_REGULATOR
/*
* According to SD Host Controller spec v3.00, if the Host System
* can afford more than 150mA, Host Driver should set XPC to 1. Also
* the value is meaningful only if Voltage Support in the Capabilities
* register is set. The actual current value is 4 times the register
* value.
*/
if (host->vmmc) {
ret = regulator_is_supported_voltage(host->vmmc, 3300000,
3300000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
caps[0] &= ~SDHCI_CAN_VDD_330;
ret = regulator_is_supported_voltage(host->vmmc, 3000000,
3000000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
caps[0] &= ~SDHCI_CAN_VDD_300;
ret = regulator_is_supported_voltage(host->vmmc, 1800000,
1800000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
caps[0] &= ~SDHCI_CAN_VDD_180;
}
+#endif /* CONFIG_REGULATOR */
--
Chris Ball <[email protected]> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
