From: RichardZhu <[email protected]>
Some SD cards insertions will cause a glitch on SD dat1
which is also a card interrupt signal. Thus the wrongly
generated card interrupt will make system panic because
there's no registered sdio interrupt handler.
This patch fixes this issue.
Note: This is a workaround for i.MX6 version 1.0 silicon. It's
fixed in hardware in version 1.1 silicon.
Signed-off-by: Tony Lin <[email protected]>
Signed-off-by: RichardZhu <[email protected]>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 18 +++++++++++++++++-
1 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
b/drivers/mmc/host/sdhci-esdhc-imx.c
index a13e75b..50a72a4 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -486,6 +486,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct
platform_device *pdev)
struct clk *clk;
int err;
struct pltfm_imx_data *imx_data;
+ u32 reg;
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
if (IS_ERR(host))
@@ -513,7 +514,22 @@ static int __devinit sdhci_esdhc_imx_probe(struct
platform_device *pdev)
clk_prepare_enable(clk);
pltfm_host->clk = clk;
- host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ /* disable card interrupt enable bit, and clear status bit
+ * the default value of this enable bit is 1, but it should
+ * be 0 regarding to standard host controller spec 2.1.3.
+ * if this bit is 1, it may cause some problems.
+ * there's dat1 glitch when some cards inserting into the slot,
+ * thus wrongly generate a card interrupt that will cause
+ * system panic because it lacks of sdio handler
+ * following code will solve the problem.
+ */
+ reg = sdhci_readl(host, SDHCI_INT_ENABLE);
+ reg &= ~SDHCI_INT_CARD_INT;
+ sdhci_writel(host, reg, SDHCI_INT_ENABLE);
+ sdhci_writel(host, SDHCI_INT_CARD_INT, SDHCI_INT_STATUS);
+
+ if (!is_imx25_esdhc(imx_data))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
