On Sun, 14 Mar 2010, Hans Verkuil wrote:
> Review notes below...
>
> On Thursday 11 March 2010 11:25:42 Guennadi Liakhovetski wrote:
> > AK8814 only differs from AK8813 by included Macrovision Copy Protection
> > function. This patch adds a driver for AK8813 and AK8814 I2C PAL/NTSC TV
> > encoders.
> >
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> > ---
[snip]
> > diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
> > new file mode 100644
> > index 0000000..b91f0f6
> > --- /dev/null
> > +++ b/drivers/media/video/ak881x.c
> > @@ -0,0 +1,360 @@
> > +/*
> > + * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems
> > Co., Ltd. (AKM)
> > + *
> > + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/init.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/videodev2.h>
> > +
> > +#include <media/ak881x.h>
> > +#include <media/v4l2-chip-ident.h>
> > +#include <media/v4l2-common.h>
> > +#include <media/v4l2-device.h>
> > +
> > +#define AK881X_INTERFACE_MODE 0
> > +#define AK881X_VIDEO_PROCESS1 1
> > +#define AK881X_VIDEO_PROCESS2 2
> > +#define AK881X_VIDEO_PROCESS3 3
> > +#define AK881X_DAC_MODE 5
> > +#define AK881X_STATUS 0x24
> > +#define AK881X_DEVICE_ID 0x25
> > +#define AK881X_DEVICE_REVISION 0x26
> > +
> > +struct ak881x {
> > + struct v4l2_subdev subdev;
> > + struct ak881x_pdata *pdata;
> > + int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h
> > */
> > + char revision; /* DEVICE_REVISION content */
> > +};
> > +
> > +static int reg_read(struct i2c_client *client, const u8 reg)
> > +{
> > + return i2c_smbus_read_byte_data(client, reg);
> > +}
> > +
> > +static int reg_write(struct i2c_client *client, const u8 reg,
> > + const u8 data)
> > +{
> > + return i2c_smbus_write_byte_data(client, reg, data);
> > +}
>
> I suggest making these inline.
Disagree. It has been advised on the LKML to _not_ use inline in .c files
- the compiler decides itself, and it does trivially inline these.
> I also recommend using struct v4l2_subdev instead of struct i2c_client as
> argument. In my experience it makes the code cleaner if the mapping from
> subdev to i2c_client is done at the lowest possible level.
May I disagree with this one too?;) Just for a mere reason, that in this
specific case, register-access routines should not need anything except the
i2c-client - by desiign.
> > +
> > +static int reg_set(struct i2c_client *client, const u8 reg,
> > + const u8 data, u8 mask)
> > +{
> > + int ret = reg_read(client, reg);
> > + if (ret < 0)
> > + return ret;
> > + return reg_write(client, reg, (ret & ~mask) | (data & mask));
> > +}
> > +
> > +static struct ak881x *to_ak881x(const struct i2c_client *client)
> > +{
> > + return container_of(i2c_get_clientdata(client), struct ak881x, subdev);
> > +}
>
> Ditto for this one.
>
> > +
> > +static int ak881x_g_chip_ident(struct v4l2_subdev *sd,
> > + struct v4l2_dbg_chip_ident *id)
> > +{
> > + struct i2c_client *client = sd->priv;
>
> Don't use sd->priv directly. Use v4l2_get_subdevdata(sd) instead.
Ok.
> > + struct ak881x *ak881x = to_ak881x(client);
> > +
> > + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
> > + return -EINVAL;
> > +
> > + if (id->match.addr != client->addr)
> > + return -ENODEV;
> > +
> > + id->ident = ak881x->id;
> > + id->revision = ak881x->revision;
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > +static int ak881x_g_register(struct v4l2_subdev *sd,
> > + struct v4l2_dbg_register *reg)
> > +{
> > + struct i2c_client *client = sd->priv;
> > +
> > + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
> > + return -EINVAL;
> > +
> > + if (reg->match.addr != client->addr)
> > + return -ENODEV;
> > +
> > + reg->val = reg_read(client, reg->reg);
> > +
> > + if (reg->val > 0xffff)
> > + return -EIO;
> > +
> > + return 0;
> > +}
> > +
> > +static int ak881x_s_register(struct v4l2_subdev *sd,
> > + struct v4l2_dbg_register *reg)
> > +{
> > + struct i2c_client *client = sd->priv;
> > +
> > + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
> > + return -EINVAL;
> > +
> > + if (reg->match.addr != client->addr)
> > + return -ENODEV;
> > +
> > + if (reg_write(client, reg->reg, reg->val) < 0)
> > + return -EIO;
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +static int ak881x_try_g_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_mbus_framefmt *mf)
>
> Can you rename this function to ak881x_try_g_mbus_fmt? Same for the other
> fmt functions.
Well, we (including you) wanted to eventually convert all subdev drivers
to mediabus, and then to rename *_mbus_fmt to just *_fmt. That's why I
kept these names without "mbus" also in all soc-camera drivers, as I was
converting them to mediabus. So, I would prefer to keep this here too.
> > +{
> > + v4l_bound_align_image(&mf->width, 0, 720, 2,
> > + &mf->height, 0, 480, 1, 0);
>
> 480? Doesn't this do 576 as well when PAL is selected?
Right, it, probably, can.
> > + mf->field = V4L2_FIELD_INTERLACED;
> > + mf->code = V4L2_MBUS_FMT_YUYV8_2X8_LE;
> > + mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
> > +
> > + return 0;
> > +}
> > +
> > +static int ak881x_s_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_mbus_framefmt *mf)
> > +{
> > + if (mf->field != V4L2_FIELD_INTERLACED ||
> > + mf->code != V4L2_MBUS_FMT_YUYV8_2X8_LE)
> > + return -EINVAL;
> > +
> > + return ak881x_try_g_fmt(sd, mf);
> > +}
> > +
> > +static int ak881x_enum_fmt(struct v4l2_subdev *sd, int index,
> > + enum v4l2_mbus_pixelcode *code)
> > +{
> > + if (index)
> > + return -EINVAL;
> > +
> > + *code = V4L2_MBUS_FMT_YUYV8_2X8_LE;
> > + return 0;
> > +}
> > +
> > +static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
> > +{
> > + a->bounds.left = 0;
> > + a->bounds.top = 0;
> > + a->bounds.width = 720;
> > + a->bounds.height = 240 * 2;
>
> 288 * 2 for PAL?
Yup.
> > + a->defrect = a->bounds;
> > + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> > + a->pixelaspect.numerator = 1;
> > + a->pixelaspect.denominator = 1;
> > +
> > + return 0;
> > +}
> > +
> > +static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
> > +{
> > + struct i2c_client *client = sd->priv;
> > + u8 vp1;
> > +
> > + switch (std) {
> > + case V4L2_STD_NTSC_M:
> > + default:
> > + vp1 = 0;
> > + break;
> > + case V4L2_STD_NTSC_443:
> > + vp1 = 3;
> > + break;
> > + case V4L2_STD_PAL_M:
> > + vp1 = 5;
> > + break;
> > + case V4L2_STD_PAL_60:
> > + vp1 = 7;
> > + break;
> > + case V4L2_STD_PAL_B:
> > + case V4L2_STD_PAL_D:
> > + case V4L2_STD_PAL_G:
> > + case V4L2_STD_PAL_H:
> > + case V4L2_STD_PAL_I:
> > + vp1 = 0xf;
> > + }
> > +
> > + reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf);
> > +
> > + return 0;
> > +}
> > +
> > +static int ak881x_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + struct i2c_client *client = sd->priv;
> > + struct ak881x *ak881x = to_ak881x(client);
> > +
> > + if (enable) {
> > + u8 dac;
> > + /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */
> > + /* Default: composite output */
> > + if (ak881x->pdata->flags & AK881X_COMPONENT)
> > + dac = 3;
> > + else
> > + dac = 4;
> > + /* Turn on the DAC(s) */
> > + reg_write(client, AK881X_DAC_MODE, dac);
> > + dev_dbg(&client->dev, "chip status 0x%x\n",
> > + reg_read(client, AK881X_STATUS));
> > + } else {
> > + /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */
> > + reg_write(client, AK881X_DAC_MODE, 0);
> > + dev_dbg(&client->dev, "chip status 0x%x\n",
> > + reg_read(client, AK881X_STATUS));
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = {
> > + .g_chip_ident = ak881x_g_chip_ident,
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > + .g_register = ak881x_g_register,
> > + .s_register = ak881x_s_register,
> > +#endif
> > +};
> > +
> > +static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = {
> > + .s_mbus_fmt = ak881x_s_fmt,
> > + .g_mbus_fmt = ak881x_try_g_fmt,
> > + .try_mbus_fmt = ak881x_try_g_fmt,
> > + .cropcap = ak881x_cropcap,
> > + .enum_mbus_fmt = ak881x_enum_fmt,
> > + .s_std_output = ak881x_s_std_output,
> > + .s_stream = ak881x_s_stream,
> > +};
> > +
> > +static struct v4l2_subdev_ops ak881x_subdev_ops = {
> > + .core = &ak881x_subdev_core_ops,
> > + .video = &ak881x_subdev_video_ops,
> > +};
> > +
> > +static int ak881x_probe(struct i2c_client *client,
> > + const struct i2c_device_id *did)
> > +{
> > + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> > + struct ak881x *ak881x;
> > + u8 ifmode, data;
> > +
> > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
> > + dev_warn(&adapter->dev,
> > + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
> > + return -EIO;
> > + }
> > +
> > + ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL);
> > + if (!ak881x)
> > + return -ENOMEM;
> > +
> > + v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops);
> > +
> > + data = reg_read(client, AK881X_DEVICE_ID);
> > +
> > + switch (data) {
> > + case 0x13:
> > + ak881x->id = V4L2_IDENT_AK8813;
> > + break;
> > + case 0x14:
> > + ak881x->id = V4L2_IDENT_AK8814;
> > + break;
> > + default:
> > + dev_err(&client->dev,
> > + "No ak881x chip detected, register read %x\n", data);
> > + i2c_set_clientdata(client, NULL);
>
> No need to call i2c_set_clientdata here.
Ok.
> > + kfree(ak881x);
> > + return -ENODEV;
> > + }
> > +
> > + ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION);
> > + ak881x->pdata = client->dev.platform_data;
> > +
> > + if (ak881x->pdata) {
> > + if (ak881x->pdata->flags & AK881X_FIELD)
> > + ifmode = 4;
> > + else
> > + ifmode = 0;
> > +
> > + switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) {
> > + case AK881X_IF_MODE_BT656:
> > + ifmode |= 1;
> > + break;
> > + case AK881X_IF_MODE_MASTER:
> > + ifmode |= 2;
> > + break;
> > + case AK881X_IF_MODE_SLAVE:
> > + default:
> > + break;
> > + }
> > +
> > + dev_dbg(&client->dev, "IF mode %x\n", ifmode);
> > +
> > + /*
> > + * "Line Blanking No." seems to be the same as the number of
> > + * "black" lines on, e.g., SuperH VOU, whose default value of 20
> > + * "incidentally" matches ak881x' default
> > + */
> > + reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3));
> > + }
> > +
> > + dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n",
> > + data, ak881x->revision);
>
> Please use this instead:
>
> v4l2_info(&ak881x->subdev, "chip found @ 0x%02x (%s, revision %x)\n",
> client->addr << 1, client->adapter->name, ak881x->revision);
>
> This is for consistency with other i2c v4l drivers.
>
> Please also use v4l2_info/warn/err/dbg instead of the dev_ versions (except if
> there is no subdev pointer available). Again for consistency with other i2c
> drivers (and a more concise prefix as well).
Ooh, why do we have to be special?... Firstly, it is a Linux convention to
specify I2C device addresses without the read / write bit. Granted it has
introduced enough confusion, but don't we make it even worse with this?...
Secondly, I didn't like these macros as I first saw them, and I still
don't like them for a very simple reason: do all driver subsystems now
have to introduce their own *_printk versions? usb_info()? pci_info()?
ata_info()? net_info()?... Don't we have dev_* exactly for this purpose -
to be used by all drivers, regardless of the subsystem? Can we maybe
rethink this approach, shall we?
> > +
> > + return 0;
> > +}
> > +
> > +static int ak881x_remove(struct i2c_client *client)
> > +{
> > + struct ak881x *ak881x = to_ak881x(client);
> > +
> > + i2c_set_clientdata(client, NULL);
>
> This is not right. Use this instead:
>
> v4l2_device_unregister_subdev(sd);
>
> See v4l2-framework.txt why you should do this in remove().
Ok.
> > + kfree(ak881x);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id ak881x_id[] = {
> > + { "ak8813", 0 },
> > + { "ak8814", 0 },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ak881x_id);
> > +
> > +static struct i2c_driver ak881x_i2c_driver = {
> > + .driver = {
> > + .name = "ak881x",
> > + },
> > + .probe = ak881x_probe,
> > + .remove = ak881x_remove,
> > + .id_table = ak881x_id,
> > +};
> > +
> > +static int __init ak881x_module_init(void)
> > +{
> > + return i2c_add_driver(&ak881x_i2c_driver);
> > +}
> > +
> > +static void __exit ak881x_module_exit(void)
> > +{
> > + i2c_del_driver(&ak881x_i2c_driver);
> > +}
> > +
> > +module_init(ak881x_module_init);
> > +module_exit(ak881x_module_exit);
> > +
> > +MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814");
> > +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovet...@gmx.de>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/media/ak881x.h b/include/media/ak881x.h
> > new file mode 100644
> > index 0000000..b7f2add
> > --- /dev/null
> > +++ b/include/media/ak881x.h
> > @@ -0,0 +1,25 @@
> > +/*
> > + * Header for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems
> > Co., Ltd. (AKM)
> > + *
> > + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef AK881X_H
> > +#define AK881X_H
> > +
> > +#define AK881X_IF_MODE_MASK (3 << 0)
> > +#define AK881X_IF_MODE_BT656 (0 << 0)
> > +#define AK881X_IF_MODE_MASTER (1 << 0)
> > +#define AK881X_IF_MODE_SLAVE (2 << 0)
> > +#define AK881X_FIELD (1 << 2)
> > +#define AK881X_COMPONENT (1 << 3)
> > +
> > +struct ak881x_pdata {
> > + unsigned long flags;
>
> Why unsigned long? u32 makes more sense. For 64-bit archs unsigned long is
> 64 bits.
Disagree. I'm trying to follow the rule to only use fixed-bitsize types
where needed, e.g., where values, they describe, correspond to some (fixed
width) hardware registers, or are a part of an ABI. In all other cases I
prefer to use C-native types. So, if you really want to save those 32 bits
per ak881x device on hypothetical 64-bit systems where it can ever by used
- we can make it unsigned int, otherwise, using a long for flags has
become more or less a tradition, I think.
> > +};
> > +
> > +#endif
> > diff --git a/include/media/v4l2-chip-ident.h
> > b/include/media/v4l2-chip-ident.h
> > index 6cc107d..5d7b742 100644
> > --- a/include/media/v4l2-chip-ident.h
> > +++ b/include/media/v4l2-chip-ident.h
> > @@ -289,6 +289,10 @@ enum {
> >
> > /* Sharp RJ54N1CB0C, 0xCB0C = 51980 */
> > V4L2_IDENT_RJ54N1CB0C = 51980,
> > +
> > + /* AKM AK8813/AK8814 */
> > + V4L2_IDENT_AK8813 = 8813,
> > + V4L2_IDENT_AK8814 = 8814,
>
> The IDs in v4l2-chip-ident.h should be kept in increasing numeric order. I see
> that several are already placed out of order. I'm going to make a patch for
> that and then you can add these new IDs in the right place.
Yep, will do.
> > };
> >
> > #endif
> >
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
