Review notes below...
On Thursday 11 March 2010 11:25:42 Guennadi Liakhovetski wrote:
> AK8814 only differs from AK8813 by included Macrovision Copy Protection
> function. This patch adds a driver for AK8813 and AK8814 I2C PAL/NTSC TV
> encoders.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> ---
>
> as is easy to guess, also tested on the same ms7724se
>
> drivers/media/video/Kconfig | 7 +
> drivers/media/video/Makefile | 2 +
> drivers/media/video/ak881x.c | 360
> +++++++++++++++++++++++++++++++++++++++
> include/media/ak881x.h | 25 +++
> include/media/v4l2-chip-ident.h | 4 +
> 5 files changed, 398 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/video/ak881x.c
> create mode 100644 include/media/ak881x.h
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index be6d016..d029cc5 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -819,6 +819,13 @@ config VIDEO_CAFE_CCIC
> CMOS camera controller. This is the controller found on first-
> generation OLPC systems.
>
> +config VIDEO_AK881X
> + tristate "ak8813/ak8814 support"
> + depends on I2C
> + help
> + This is a video output driver for AK8813 and AK8814 TV encoders
> + from AKM
> +
> config SOC_CAMERA
> tristate "SoC camera support"
> depends on VIDEO_V4L2 && HAS_DMA && I2C
> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> index 2669d34..6790051 100644
> --- a/drivers/media/video/Makefile
> +++ b/drivers/media/video/Makefile
> @@ -149,6 +149,8 @@ obj-$(CONFIG_VIDEO_CX18) += cx18/
> obj-$(CONFIG_VIDEO_VIVI) += vivi.o
> obj-$(CONFIG_VIDEO_CX23885) += cx23885/
>
> +obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
> +
> obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o
> obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
> obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
> diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
> new file mode 100644
> index 0000000..b91f0f6
> --- /dev/null
> +++ b/drivers/media/video/ak881x.c
> @@ -0,0 +1,360 @@
> +/*
> + * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co.,
> Ltd. (AKM)
> + *
> + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/ak881x.h>
> +#include <media/v4l2-chip-ident.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-device.h>
> +
> +#define AK881X_INTERFACE_MODE 0
> +#define AK881X_VIDEO_PROCESS1 1
> +#define AK881X_VIDEO_PROCESS2 2
> +#define AK881X_VIDEO_PROCESS3 3
> +#define AK881X_DAC_MODE 5
> +#define AK881X_STATUS 0x24
> +#define AK881X_DEVICE_ID 0x25
> +#define AK881X_DEVICE_REVISION 0x26
> +
> +struct ak881x {
> + struct v4l2_subdev subdev;
> + struct ak881x_pdata *pdata;
> + int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h
> */
> + char revision; /* DEVICE_REVISION content */
> +};
> +
> +static int reg_read(struct i2c_client *client, const u8 reg)
> +{
> + return i2c_smbus_read_byte_data(client, reg);
> +}
> +
> +static int reg_write(struct i2c_client *client, const u8 reg,
> + const u8 data)
> +{
> + return i2c_smbus_write_byte_data(client, reg, data);
> +}
I suggest making these inline.
I also recommend using struct v4l2_subdev instead of struct i2c_client as
argument. In my experience it makes the code cleaner if the mapping from
subdev to i2c_client is done at the lowest possible level.
> +
> +static int reg_set(struct i2c_client *client, const u8 reg,
> + const u8 data, u8 mask)
> +{
> + int ret = reg_read(client, reg);
> + if (ret < 0)
> + return ret;
> + return reg_write(client, reg, (ret & ~mask) | (data & mask));
> +}
> +
> +static struct ak881x *to_ak881x(const struct i2c_client *client)
> +{
> + return container_of(i2c_get_clientdata(client), struct ak881x, subdev);
> +}
Ditto for this one.
> +
> +static int ak881x_g_chip_ident(struct v4l2_subdev *sd,
> + struct v4l2_dbg_chip_ident *id)
> +{
> + struct i2c_client *client = sd->priv;
Don't use sd->priv directly. Use v4l2_get_subdevdata(sd) instead.
> + struct ak881x *ak881x = to_ak881x(client);
> +
> + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
> + return -EINVAL;
> +
> + if (id->match.addr != client->addr)
> + return -ENODEV;
> +
> + id->ident = ak881x->id;
> + id->revision = ak881x->revision;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int ak881x_g_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = sd->priv;
> +
> + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
> + return -EINVAL;
> +
> + if (reg->match.addr != client->addr)
> + return -ENODEV;
> +
> + reg->val = reg_read(client, reg->reg);
> +
> + if (reg->val > 0xffff)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int ak881x_s_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct i2c_client *client = sd->priv;
> +
> + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
> + return -EINVAL;
> +
> + if (reg->match.addr != client->addr)
> + return -ENODEV;
> +
> + if (reg_write(client, reg->reg, reg->val) < 0)
> + return -EIO;
> +
> + return 0;
> +}
> +#endif
> +
> +static int ak881x_try_g_fmt(struct v4l2_subdev *sd,
> + struct v4l2_mbus_framefmt *mf)
Can you rename this function to ak881x_try_g_mbus_fmt? Same for the other
fmt functions.
> +{
> + v4l_bound_align_image(&mf->width, 0, 720, 2,
> + &mf->height, 0, 480, 1, 0);
480? Doesn't this do 576 as well when PAL is selected?
> + mf->field = V4L2_FIELD_INTERLACED;
> + mf->code = V4L2_MBUS_FMT_YUYV8_2X8_LE;
> + mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
> +
> + return 0;
> +}
> +
> +static int ak881x_s_fmt(struct v4l2_subdev *sd,
> + struct v4l2_mbus_framefmt *mf)
> +{
> + if (mf->field != V4L2_FIELD_INTERLACED ||
> + mf->code != V4L2_MBUS_FMT_YUYV8_2X8_LE)
> + return -EINVAL;
> +
> + return ak881x_try_g_fmt(sd, mf);
> +}
> +
> +static int ak881x_enum_fmt(struct v4l2_subdev *sd, int index,
> + enum v4l2_mbus_pixelcode *code)
> +{
> + if (index)
> + return -EINVAL;
> +
> + *code = V4L2_MBUS_FMT_YUYV8_2X8_LE;
> + return 0;
> +}
> +
> +static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
> +{
> + a->bounds.left = 0;
> + a->bounds.top = 0;
> + a->bounds.width = 720;
> + a->bounds.height = 240 * 2;
288 * 2 for PAL?
> + a->defrect = a->bounds;
> + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> + a->pixelaspect.numerator = 1;
> + a->pixelaspect.denominator = 1;
> +
> + return 0;
> +}
> +
> +static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
> +{
> + struct i2c_client *client = sd->priv;
> + u8 vp1;
> +
> + switch (std) {
> + case V4L2_STD_NTSC_M:
> + default:
> + vp1 = 0;
> + break;
> + case V4L2_STD_NTSC_443:
> + vp1 = 3;
> + break;
> + case V4L2_STD_PAL_M:
> + vp1 = 5;
> + break;
> + case V4L2_STD_PAL_60:
> + vp1 = 7;
> + break;
> + case V4L2_STD_PAL_B:
> + case V4L2_STD_PAL_D:
> + case V4L2_STD_PAL_G:
> + case V4L2_STD_PAL_H:
> + case V4L2_STD_PAL_I:
> + vp1 = 0xf;
> + }
> +
> + reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf);
> +
> + return 0;
> +}
> +
> +static int ak881x_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct i2c_client *client = sd->priv;
> + struct ak881x *ak881x = to_ak881x(client);
> +
> + if (enable) {
> + u8 dac;
> + /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */
> + /* Default: composite output */
> + if (ak881x->pdata->flags & AK881X_COMPONENT)
> + dac = 3;
> + else
> + dac = 4;
> + /* Turn on the DAC(s) */
> + reg_write(client, AK881X_DAC_MODE, dac);
> + dev_dbg(&client->dev, "chip status 0x%x\n",
> + reg_read(client, AK881X_STATUS));
> + } else {
> + /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */
> + reg_write(client, AK881X_DAC_MODE, 0);
> + dev_dbg(&client->dev, "chip status 0x%x\n",
> + reg_read(client, AK881X_STATUS));
> + }
> +
> + return 0;
> +}
> +
> +static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = {
> + .g_chip_ident = ak881x_g_chip_ident,
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = ak881x_g_register,
> + .s_register = ak881x_s_register,
> +#endif
> +};
> +
> +static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = {
> + .s_mbus_fmt = ak881x_s_fmt,
> + .g_mbus_fmt = ak881x_try_g_fmt,
> + .try_mbus_fmt = ak881x_try_g_fmt,
> + .cropcap = ak881x_cropcap,
> + .enum_mbus_fmt = ak881x_enum_fmt,
> + .s_std_output = ak881x_s_std_output,
> + .s_stream = ak881x_s_stream,
> +};
> +
> +static struct v4l2_subdev_ops ak881x_subdev_ops = {
> + .core = &ak881x_subdev_core_ops,
> + .video = &ak881x_subdev_video_ops,
> +};
> +
> +static int ak881x_probe(struct i2c_client *client,
> + const struct i2c_device_id *did)
> +{
> + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> + struct ak881x *ak881x;
> + u8 ifmode, data;
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
> + dev_warn(&adapter->dev,
> + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
> + return -EIO;
> + }
> +
> + ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL);
> + if (!ak881x)
> + return -ENOMEM;
> +
> + v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops);
> +
> + data = reg_read(client, AK881X_DEVICE_ID);
> +
> + switch (data) {
> + case 0x13:
> + ak881x->id = V4L2_IDENT_AK8813;
> + break;
> + case 0x14:
> + ak881x->id = V4L2_IDENT_AK8814;
> + break;
> + default:
> + dev_err(&client->dev,
> + "No ak881x chip detected, register read %x\n", data);
> + i2c_set_clientdata(client, NULL);
No need to call i2c_set_clientdata here.
> + kfree(ak881x);
> + return -ENODEV;
> + }
> +
> + ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION);
> + ak881x->pdata = client->dev.platform_data;
> +
> + if (ak881x->pdata) {
> + if (ak881x->pdata->flags & AK881X_FIELD)
> + ifmode = 4;
> + else
> + ifmode = 0;
> +
> + switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) {
> + case AK881X_IF_MODE_BT656:
> + ifmode |= 1;
> + break;
> + case AK881X_IF_MODE_MASTER:
> + ifmode |= 2;
> + break;
> + case AK881X_IF_MODE_SLAVE:
> + default:
> + break;
> + }
> +
> + dev_dbg(&client->dev, "IF mode %x\n", ifmode);
> +
> + /*
> + * "Line Blanking No." seems to be the same as the number of
> + * "black" lines on, e.g., SuperH VOU, whose default value of 20
> + * "incidentally" matches ak881x' default
> + */
> + reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3));
> + }
> +
> + dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n",
> + data, ak881x->revision);
Please use this instead:
v4l2_info(&ak881x->subdev, "chip found @ 0x%02x (%s, revision %x)\n",
client->addr << 1, client->adapter->name, ak881x->revision);
This is for consistency with other i2c v4l drivers.
Please also use v4l2_info/warn/err/dbg instead of the dev_ versions (except if
there is no subdev pointer available). Again for consistency with other i2c
drivers (and a more concise prefix as well).
> +
> + return 0;
> +}
> +
> +static int ak881x_remove(struct i2c_client *client)
> +{
> + struct ak881x *ak881x = to_ak881x(client);
> +
> + i2c_set_clientdata(client, NULL);
This is not right. Use this instead:
v4l2_device_unregister_subdev(sd);
See v4l2-framework.txt why you should do this in remove().
> + kfree(ak881x);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ak881x_id[] = {
> + { "ak8813", 0 },
> + { "ak8814", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ak881x_id);
> +
> +static struct i2c_driver ak881x_i2c_driver = {
> + .driver = {
> + .name = "ak881x",
> + },
> + .probe = ak881x_probe,
> + .remove = ak881x_remove,
> + .id_table = ak881x_id,
> +};
> +
> +static int __init ak881x_module_init(void)
> +{
> + return i2c_add_driver(&ak881x_i2c_driver);
> +}
> +
> +static void __exit ak881x_module_exit(void)
> +{
> + i2c_del_driver(&ak881x_i2c_driver);
> +}
> +
> +module_init(ak881x_module_init);
> +module_exit(ak881x_module_exit);
> +
> +MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814");
> +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovet...@gmx.de>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/ak881x.h b/include/media/ak881x.h
> new file mode 100644
> index 0000000..b7f2add
> --- /dev/null
> +++ b/include/media/ak881x.h
> @@ -0,0 +1,25 @@
> +/*
> + * Header for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co.,
> Ltd. (AKM)
> + *
> + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef AK881X_H
> +#define AK881X_H
> +
> +#define AK881X_IF_MODE_MASK (3 << 0)
> +#define AK881X_IF_MODE_BT656 (0 << 0)
> +#define AK881X_IF_MODE_MASTER (1 << 0)
> +#define AK881X_IF_MODE_SLAVE (2 << 0)
> +#define AK881X_FIELD (1 << 2)
> +#define AK881X_COMPONENT (1 << 3)
> +
> +struct ak881x_pdata {
> + unsigned long flags;
Why unsigned long? u32 makes more sense. For 64-bit archs unsigned long is
64 bits.
> +};
> +
> +#endif
> diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
> index 6cc107d..5d7b742 100644
> --- a/include/media/v4l2-chip-ident.h
> +++ b/include/media/v4l2-chip-ident.h
> @@ -289,6 +289,10 @@ enum {
>
> /* Sharp RJ54N1CB0C, 0xCB0C = 51980 */
> V4L2_IDENT_RJ54N1CB0C = 51980,
> +
> + /* AKM AK8813/AK8814 */
> + V4L2_IDENT_AK8813 = 8813,
> + V4L2_IDENT_AK8814 = 8814,
The IDs in v4l2-chip-ident.h should be kept in increasing numeric order. I see
that several are already placed out of order. I'm going to make a patch for
that and then you can add these new IDs in the right place.
> };
>
> #endif
>
Regards,
Hans
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
