Hi Kieran,
Thanks for your feedback.
On 2019-02-18 11:19:50 +0000, Kieran Bingham wrote:
> Hi Niklas,
>
> On 18/02/2019 10:03, Niklas Söderlund wrote:
> > Latest datasheet (rev 1.50) clarifies that the FLD register should be
> > set after LINKCNT.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> > ---
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index 50486301c21b4bae..f90b380478775015 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -545,7 +545,6 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
> > rcsi2_write(priv, PHTC_REG, 0);
> >
> > /* Configure */
> > - rcsi2_write(priv, FLD_REG, fld);
> > rcsi2_write(priv, VCDT_REG, vcdt);
> > if (vcdt2)
> > rcsi2_write(priv, VCDT2_REG, vcdt2);
> > @@ -576,6 +575,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
>
> Hrm ... I'm on linux-media/master and I don't see a function named
> rcsi2_start_receiver.
>
> What base am I missing? I presume there are rework patches here in flight.
Yes it's patches in flight,
[PATCH] rcar-csi2: Use standby mode instead of resetting
>
>
> > rcsi2_write(priv, PHYCNT_REG, phycnt);
> > rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
> > LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
> > + rcsi2_write(priv, FLD_REG, fld);
>
> However, I can see that this matches the flow chart in figures
> 25.{17,18,19,20}
>
> So
>
> Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Thanks!
>
>
> > rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
> > rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ);
> >
> >
>
>
> --
> Regards
> --
> Kieran
--
Regards,
Niklas Söderlund
