Hi Niklas,
On 18/02/2019 10:03, Niklas Söderlund wrote:
> Latest information from hardware engineers reveals that H3 ES2 and ES3
> of behaves differently when working with link speeds bellow 250 Mpbs.
of? "of the rcar-csi2?"
> Add a SoC match for H3 ES2.* and use the correct startup sequence.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
Assuming the step1 table is accurate, which I have not yet been able to
validate:
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 39 ++++++++++++++++++---
> 1 file changed, 35 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index fbbe86a7a0fe14ab..50486301c21b4bae 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -932,6 +932,25 @@ static int rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2
> *priv, unsigned int mbps)
> return rcsi2_phtw_write_array(priv, step2);
> }
>
> +static int rcsi2_init_phtw_h3es2(struct rcar_csi2 *priv, unsigned int mbps)
> +{
> + static const struct phtw_value step1[] = {
> + { .data = 0xcc, .code = 0xe2 },
> + { .data = 0x01, .code = 0xe3 },
> + { .data = 0x11, .code = 0xe4 },
> + { .data = 0x01, .code = 0xe5 },
> + { .data = 0x10, .code = 0x04 },
> + { .data = 0x38, .code = 0x08 },
> + { .data = 0x01, .code = 0x00 },
> + { .data = 0x4b, .code = 0xac },
> + { .data = 0x03, .code = 0x00 },
> + { .data = 0x80, .code = 0x07 },
> + { /* sentinel */ },
> + };
> +
This looks reasonable - but I can't identify a table to verify these values.
Is this generated from the flow charts in section 25.3.9?
> + return rcsi2_phtw_write_array(priv, step1);
> +}
> +
> static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps)
> {
> return rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3m_e3, 0x44);
> @@ -994,6 +1013,14 @@ static const struct rcar_csi2_info
> rcar_csi2_info_r8a7795es1 = {
> .num_channels = 4,
> };
>
> +static const struct rcar_csi2_info rcar_csi2_info_r8a7795es2 = {
> + .init_phtw = rcsi2_init_phtw_h3es2,
> + .hsfreqrange = hsfreqrange_h3_v3h_m3n,
> + .csi0clkfreqrange = 0x20,
> + .num_channels = 4,
> + .clear_ulps = true,
> +};
> +
> static const struct rcar_csi2_info rcar_csi2_info_r8a7796 = {
> .hsfreqrange = hsfreqrange_m3w_h3es1,
> .num_channels = 4,
> @@ -1059,11 +1086,15 @@ static const struct of_device_id rcar_csi2_of_table[]
> = {
> };
> MODULE_DEVICE_TABLE(of, rcar_csi2_of_table);
>
> -static const struct soc_device_attribute r8a7795es1[] = {
> +static const struct soc_device_attribute r8a7795[] = {
> {
> .soc_id = "r8a7795", .revision = "ES1.*",
> .data = &rcar_csi2_info_r8a7795es1,
> },
> + {
> + .soc_id = "r8a7795", .revision = "ES2.*",
> + .data = &rcar_csi2_info_r8a7795es2,
> + },
> { /* sentinel */ },
> };
>
> @@ -1081,10 +1112,10 @@ static int rcsi2_probe(struct platform_device *pdev)
> priv->info = of_device_get_match_data(&pdev->dev);
>
> /*
> - * r8a7795 ES1.x behaves differently than the ES2.0+ but doesn't
> - * have it's own compatible string.
> + * The different ES versions of r8a7795 (H3) behaves differently but
s/behaves/behave/
> + * shares the same compatible string.
s/shares/share/
> */
> - attr = soc_device_match(r8a7795es1);
> + attr = soc_device_match(r8a7795);
> if (attr)
> priv->info = attr->data;
>
>
--
Regards
--
Kieran
