Y're welcome, thanks Hans for this work, this allows us to drop our
camera interface driver directly based on subdev.
BR,
Hugues.
On 03/29/2017 03:44 PM, Hans Verkuil wrote:
> On 29/03/17 15:42, Hugues FRUCHET wrote:
>> Acked-by: Hugues Fruchet <hugues.fruc...@st.com>
>>
>> Tested successfully on STM324x9I-EVAL evaluation board embedding
>> an OV2640 camera sensor.
>>
>> I don't understand the comment around s_power op that has been dropped
>> (it is there in code), and no problem is observed doing several
>> open/close, tell me if I miss something.
>
> Darn, I forgot to remove that comment in the commit log. It's a leftover from
> an earlier version.
>
> Regards,
>
> Hans
>
>>
>> BR,
>> Hugues.
>>
>> On 03/28/2017 10:23 AM, Hans Verkuil wrote:
>>> From: Hans Verkuil <hans.verk...@cisco.com>
>>>
>>> Convert ov2640 to a standard subdev driver. The soc-camera driver no longer
>>> uses this driver, so it can safely be converted.
>>>
>>> Note: the s_power op has been dropped: this never worked. When the last
>>> open()
>>> is closed, then the power is turned off, and when it is opened again the
>>> power
>>> is turned on again, but the old state isn't restored.
>>>
>>> Someone else can figure out in the future how to get this working correctly,
>>> but I don't want to spend more time on this.
>>>
>>> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
>>> Acked-by: Sakari Ailus <sakari.ai...@linux.intel.com>
>>> ---
>>> drivers/media/i2c/Kconfig | 11 ++++
>>> drivers/media/i2c/Makefile | 1 +
>>> drivers/media/i2c/{soc_camera => }/ov2640.c | 89
>>> +++++------------------------
>>> drivers/media/i2c/soc_camera/Kconfig | 6 --
>>> drivers/media/i2c/soc_camera/Makefile | 1 -
>>> 5 files changed, 27 insertions(+), 81 deletions(-)
>>> rename drivers/media/i2c/{soc_camera => }/ov2640.c (94%)
>>>
>>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>>> index cee1dae6e014..db2c63f592c5 100644
>>> --- a/drivers/media/i2c/Kconfig
>>> +++ b/drivers/media/i2c/Kconfig
>>> @@ -520,6 +520,17 @@ config VIDEO_APTINA_PLL
>>> config VIDEO_SMIAPP_PLL
>>> tristate
>>>
>>> +config VIDEO_OV2640
>>> + tristate "OmniVision OV2640 sensor support"
>>> + depends on VIDEO_V4L2 && I2C && GPIOLIB
>>> + depends on MEDIA_CAMERA_SUPPORT
>>> + help
>>> + This is a Video4Linux2 sensor-level driver for the OmniVision
>>> + OV2640 camera.
>>> +
>>> + To compile this driver as a module, choose M here: the
>>> + module will be called ov2640.
>>> +
>>> config VIDEO_OV2659
>>> tristate "OmniVision OV2659 sensor support"
>>> depends on VIDEO_V4L2 && I2C
>>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>>> index 5bc7bbeb5499..50af1e11c85a 100644
>>> --- a/drivers/media/i2c/Makefile
>>> +++ b/drivers/media/i2c/Makefile
>>> @@ -57,6 +57,7 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
>>> obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
>>> obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
>>> obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
>>> +obj-$(CONFIG_VIDEO_OV2640) += ov2640.o
>>> obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
>>> obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
>>> obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
>>> diff --git a/drivers/media/i2c/soc_camera/ov2640.c
>>> b/drivers/media/i2c/ov2640.c
>>> similarity index 94%
>>> rename from drivers/media/i2c/soc_camera/ov2640.c
>>> rename to drivers/media/i2c/ov2640.c
>>> index b9a0069f5b33..83f88efbce69 100644
>>> --- a/drivers/media/i2c/soc_camera/ov2640.c
>>> +++ b/drivers/media/i2c/ov2640.c
>>> @@ -24,8 +24,8 @@
>>> #include <linux/v4l2-mediabus.h>
>>> #include <linux/videodev2.h>
>>>
>>> -#include <media/soc_camera.h>
>>> #include <media/v4l2-clk.h>
>>> +#include <media/v4l2-device.h>
>>> #include <media/v4l2-subdev.h>
>>> #include <media/v4l2-ctrls.h>
>>> #include <media/v4l2-image-sizes.h>
>>> @@ -287,7 +287,6 @@ struct ov2640_priv {
>>> struct v4l2_clk *clk;
>>> const struct ov2640_win_size *win;
>>>
>>> - struct soc_camera_subdev_desc ssdd_dt;
>>> struct gpio_desc *resetb_gpio;
>>> struct gpio_desc *pwdn_gpio;
>>> };
>>> @@ -677,13 +676,8 @@ static int ov2640_reset(struct i2c_client *client)
>>> }
>>>
>>> /*
>>> - * soc_camera_ops functions
>>> + * functions
>>> */
>>> -static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
>>> -{
>>> - return 0;
>>> -}
>>> -
>>> static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
>>> {
>>> struct v4l2_subdev *sd =
>>> @@ -744,10 +738,16 @@ static int ov2640_s_register(struct v4l2_subdev *sd,
>>> static int ov2640_s_power(struct v4l2_subdev *sd, int on)
>>> {
>>> struct i2c_client *client = v4l2_get_subdevdata(sd);
>>> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
>>> struct ov2640_priv *priv = to_ov2640(client);
>>>
>>> - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
>>> + gpiod_direction_output(priv->pwdn_gpio, !on);
>>> + if (on && priv->resetb_gpio) {
>>> + /* Active the resetb pin to perform a reset pulse */
>>> + gpiod_direction_output(priv->resetb_gpio, 1);
>>> + usleep_range(3000, 5000);
>>> + gpiod_direction_output(priv->resetb_gpio, 0);
>>> + }
>>> + return 0;
>>> }
>>>
>>> /* Select the nearest higher resolution for capture */
>>> @@ -994,26 +994,6 @@ static struct v4l2_subdev_core_ops
>>> ov2640_subdev_core_ops = {
>>> .s_power = ov2640_s_power,
>>> };
>>>
>>> -static int ov2640_g_mbus_config(struct v4l2_subdev *sd,
>>> - struct v4l2_mbus_config *cfg)
>>> -{
>>> - struct i2c_client *client = v4l2_get_subdevdata(sd);
>>> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
>>> -
>>> - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
>>> - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
>>> - V4L2_MBUS_DATA_ACTIVE_HIGH;
>>> - cfg->type = V4L2_MBUS_PARALLEL;
>>> - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
>>> - .s_stream = ov2640_s_stream,
>>> - .g_mbus_config = ov2640_g_mbus_config,
>>> -};
>>> -
>>> static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = {
>>> .enum_mbus_code = ov2640_enum_mbus_code,
>>> .get_selection = ov2640_get_selection,
>>> @@ -1023,40 +1003,9 @@ static const struct v4l2_subdev_pad_ops
>>> ov2640_subdev_pad_ops = {
>>>
>>> static struct v4l2_subdev_ops ov2640_subdev_ops = {
>>> .core = &ov2640_subdev_core_ops,
>>> - .video = &ov2640_subdev_video_ops,
>>> .pad = &ov2640_subdev_pad_ops,
>>> };
>>>
>>> -/* OF probe functions */
>>> -static int ov2640_hw_power(struct device *dev, int on)
>>> -{
>>> - struct i2c_client *client = to_i2c_client(dev);
>>> - struct ov2640_priv *priv = to_ov2640(client);
>>> -
>>> - dev_dbg(&client->dev, "%s: %s the camera\n",
>>> - __func__, on ? "ENABLE" : "DISABLE");
>>> -
>>> - if (priv->pwdn_gpio)
>>> - gpiod_direction_output(priv->pwdn_gpio, !on);
>>> -
>>> - return 0;
>>> -}
>>> -
>>> -static int ov2640_hw_reset(struct device *dev)
>>> -{
>>> - struct i2c_client *client = to_i2c_client(dev);
>>> - struct ov2640_priv *priv = to_ov2640(client);
>>> -
>>> - if (priv->resetb_gpio) {
>>> - /* Active the resetb pin to perform a reset pulse */
>>> - gpiod_direction_output(priv->resetb_gpio, 1);
>>> - usleep_range(3000, 5000);
>>> - gpiod_direction_output(priv->resetb_gpio, 0);
>>> - }
>>> -
>>> - return 0;
>>> -}
>>> -
>>> static int ov2640_probe_dt(struct i2c_client *client,
>>> struct ov2640_priv *priv)
>>> {
>>> @@ -1076,11 +1025,6 @@ static int ov2640_probe_dt(struct i2c_client *client,
>>> else if (IS_ERR(priv->pwdn_gpio))
>>> return PTR_ERR(priv->pwdn_gpio);
>>>
>>> - /* Initialize the soc_camera_subdev_desc */
>>> - priv->ssdd_dt.power = ov2640_hw_power;
>>> - priv->ssdd_dt.reset = ov2640_hw_reset;
>>> - client->dev.platform_data = &priv->ssdd_dt;
>>> -
>>> return 0;
>>> }
>>>
>>> @@ -1091,7 +1035,6 @@ static int ov2640_probe(struct i2c_client *client,
>>> const struct i2c_device_id *did)
>>> {
>>> struct ov2640_priv *priv;
>>> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
>>> struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>>> int ret;
>>>
>>> @@ -1112,17 +1055,15 @@ static int ov2640_probe(struct i2c_client *client,
>>> if (IS_ERR(priv->clk))
>>> return -EPROBE_DEFER;
>>>
>>> - if (!ssdd && !client->dev.of_node) {
>>> + if (!client->dev.of_node) {
>>> dev_err(&client->dev, "Missing platform_data for driver\n");
>>> ret = -EINVAL;
>>> goto err_clk;
>>> }
>>>
>>> - if (!ssdd) {
>>> - ret = ov2640_probe_dt(client, priv);
>>> - if (ret)
>>> - goto err_clk;
>>> - }
>>> + ret = ov2640_probe_dt(client, priv);
>>> + if (ret)
>>> + goto err_clk;
>>>
>>> v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
>>> v4l2_ctrl_handler_init(&priv->hdl, 2);
>>> @@ -1190,6 +1131,6 @@ static struct i2c_driver ov2640_i2c_driver = {
>>>
>>> module_i2c_driver(ov2640_i2c_driver);
>>>
>>> -MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor");
>>> +MODULE_DESCRIPTION("Driver for Omni Vision 2640 sensor");
>>> MODULE_AUTHOR("Alberto Panizzo");
>>> MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/media/i2c/soc_camera/Kconfig
>>> b/drivers/media/i2c/soc_camera/Kconfig
>>> index 7704bcf5cc25..96859f37cb1c 100644
>>> --- a/drivers/media/i2c/soc_camera/Kconfig
>>> +++ b/drivers/media/i2c/soc_camera/Kconfig
>>> @@ -41,12 +41,6 @@ config SOC_CAMERA_MT9V022
>>> help
>>> This driver supports MT9V022 cameras from Micron
>>>
>>> -config SOC_CAMERA_OV2640
>>> - tristate "ov2640 camera support"
>>> - depends on SOC_CAMERA && I2C
>>> - help
>>> - This is a ov2640 camera driver
>>> -
>>> config SOC_CAMERA_OV5642
>>> tristate "ov5642 camera support"
>>> depends on SOC_CAMERA && I2C
>>> diff --git a/drivers/media/i2c/soc_camera/Makefile
>>> b/drivers/media/i2c/soc_camera/Makefile
>>> index 6f994f9353a0..974bdb721dbe 100644
>>> --- a/drivers/media/i2c/soc_camera/Makefile
>>> +++ b/drivers/media/i2c/soc_camera/Makefile
>>> @@ -3,7 +3,6 @@ obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o
>>> obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o
>>> obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o
>>> obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o
>>> -obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o
>>> obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o
>>> obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o
>>> obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o
>>>
>
