From: David Heidelberg <[email protected]> Enable the PMI8998 flash LED block and describe the white flash LED used for the rear camera.
Configure the LED in flash mode with hardware limits matching the original device configuration, including maximum current and timeout. Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi index 084058a597c10..44b6d61697caf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -590,6 +591,19 @@ &pmi8998_charger { status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <750000>; + flash-max-timeout-us = <1280000>; + }; +}; + &qupv3_id_0 { status = "okay"; }; -- 2.53.0
