Prefix log messages with the device's BDF where relevant. This will help understanding VFIO selftests logs when tests are run with multiple devices.
Signed-off-by: David Matlack <[email protected]> --- .../selftests/vfio/lib/drivers/dsa/dsa.c | 34 +++++++++---------- .../selftests/vfio/lib/drivers/ioat/ioat.c | 16 ++++----- .../selftests/vfio/lib/include/vfio_util.h | 4 +++ .../selftests/vfio/lib/vfio_pci_device.c | 1 + 4 files changed, 30 insertions(+), 25 deletions(-) diff --git a/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c b/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c index 0ca2cbc2a316..8d667be80229 100644 --- a/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c +++ b/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c @@ -70,7 +70,7 @@ static int dsa_probe(struct vfio_pci_device *device) return -EINVAL; if (dsa_int_handle_request_required(device)) { - printf("Device requires requesting interrupt handles\n"); + dev_info(device, "Device requires requesting interrupt handles\n"); return -EINVAL; } @@ -91,23 +91,23 @@ static void dsa_check_sw_err(struct vfio_pci_device *device) return; } - fprintf(stderr, "SWERR: 0x%016lx 0x%016lx 0x%016lx 0x%016lx\n", + dev_err(device, "SWERR: 0x%016lx 0x%016lx 0x%016lx 0x%016lx\n", err.bits[0], err.bits[1], err.bits[2], err.bits[3]); - fprintf(stderr, " valid: 0x%x\n", err.valid); - fprintf(stderr, " overflow: 0x%x\n", err.overflow); - fprintf(stderr, " desc_valid: 0x%x\n", err.desc_valid); - fprintf(stderr, " wq_idx_valid: 0x%x\n", err.wq_idx_valid); - fprintf(stderr, " batch: 0x%x\n", err.batch); - fprintf(stderr, " fault_rw: 0x%x\n", err.fault_rw); - fprintf(stderr, " priv: 0x%x\n", err.priv); - fprintf(stderr, " error: 0x%x\n", err.error); - fprintf(stderr, " wq_idx: 0x%x\n", err.wq_idx); - fprintf(stderr, " operation: 0x%x\n", err.operation); - fprintf(stderr, " pasid: 0x%x\n", err.pasid); - fprintf(stderr, " batch_idx: 0x%x\n", err.batch_idx); - fprintf(stderr, " invalid_flags: 0x%x\n", err.invalid_flags); - fprintf(stderr, " fault_addr: 0x%lx\n", err.fault_addr); + dev_err(device, " valid: 0x%x\n", err.valid); + dev_err(device, " overflow: 0x%x\n", err.overflow); + dev_err(device, " desc_valid: 0x%x\n", err.desc_valid); + dev_err(device, " wq_idx_valid: 0x%x\n", err.wq_idx_valid); + dev_err(device, " batch: 0x%x\n", err.batch); + dev_err(device, " fault_rw: 0x%x\n", err.fault_rw); + dev_err(device, " priv: 0x%x\n", err.priv); + dev_err(device, " error: 0x%x\n", err.error); + dev_err(device, " wq_idx: 0x%x\n", err.wq_idx); + dev_err(device, " operation: 0x%x\n", err.operation); + dev_err(device, " pasid: 0x%x\n", err.pasid); + dev_err(device, " batch_idx: 0x%x\n", err.batch_idx); + dev_err(device, " invalid_flags: 0x%x\n", err.invalid_flags); + dev_err(device, " fault_addr: 0x%lx\n", err.fault_addr); VFIO_FAIL("Software Error Detected!\n"); } @@ -256,7 +256,7 @@ static int dsa_completion_wait(struct vfio_pci_device *device, if (status == DSA_COMP_SUCCESS) return 0; - printf("Error detected during memcpy operation: 0x%x\n", status); + dev_info(device, "Error detected during memcpy operation: 0x%x\n", status); return -1; } diff --git a/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c b/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c index c3b91d9b1f59..e04dce1d544c 100644 --- a/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c +++ b/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c @@ -51,7 +51,7 @@ static int ioat_probe(struct vfio_pci_device *device) r = 0; break; default: - printf("ioat: Unsupported version: 0x%x\n", version); + dev_info(device, "ioat: Unsupported version: 0x%x\n", version); r = -EINVAL; } return r; @@ -135,13 +135,13 @@ static void ioat_handle_error(struct vfio_pci_device *device) { void *registers = ioat_channel_registers(device); - printf("Error detected during memcpy operation!\n" - " CHANERR: 0x%x\n" - " CHANERR_INT: 0x%x\n" - " DMAUNCERRSTS: 0x%x\n", - readl(registers + IOAT_CHANERR_OFFSET), - vfio_pci_config_readl(device, IOAT_PCI_CHANERR_INT_OFFSET), - vfio_pci_config_readl(device, IOAT_PCI_DMAUNCERRSTS_OFFSET)); + dev_info(device, "Error detected during memcpy operation!\n" + " CHANERR: 0x%x\n" + " CHANERR_INT: 0x%x\n" + " DMAUNCERRSTS: 0x%x\n", + readl(registers + IOAT_CHANERR_OFFSET), + vfio_pci_config_readl(device, IOAT_PCI_CHANERR_INT_OFFSET), + vfio_pci_config_readl(device, IOAT_PCI_DMAUNCERRSTS_OFFSET)); ioat_reset(device); } diff --git a/tools/testing/selftests/vfio/lib/include/vfio_util.h b/tools/testing/selftests/vfio/lib/include/vfio_util.h index 379942dc5357..babbf90688e8 100644 --- a/tools/testing/selftests/vfio/lib/include/vfio_util.h +++ b/tools/testing/selftests/vfio/lib/include/vfio_util.h @@ -50,6 +50,9 @@ VFIO_LOG_AND_EXIT(_fmt, ##__VA_ARGS__); \ } while (0) +#define dev_info(_dev, _fmt, ...) printf("%s: " _fmt, (_dev)->bdf, ##__VA_ARGS__) +#define dev_err(_dev, _fmt, ...) fprintf(stderr, "%s: " _fmt, (_dev)->bdf, ##__VA_ARGS__) + struct iommu_mode { const char *name; const char *container_path; @@ -172,6 +175,7 @@ struct iommu { }; struct vfio_pci_device { + const char *bdf; int fd; int group_fd; diff --git a/tools/testing/selftests/vfio/lib/vfio_pci_device.c b/tools/testing/selftests/vfio/lib/vfio_pci_device.c index 57bdd22573d4..f3aea724695d 100644 --- a/tools/testing/selftests/vfio/lib/vfio_pci_device.c +++ b/tools/testing/selftests/vfio/lib/vfio_pci_device.c @@ -841,6 +841,7 @@ struct vfio_pci_device *vfio_pci_device_init(const char *bdf, struct iommu *iomm device = calloc(1, sizeof(*device)); VFIO_ASSERT_NOT_NULL(device); + device->bdf = bdf; device->iommu = iommu; if (device->iommu->mode->container_path) -- 2.52.0.rc1.455.g30608eb744-goog
