While debugging issues related to aarch64 only systems I ran into speedbumps due to the lack of detail in the results reported when the guest register read and reset value preservation tests were run, they generated an immediately fatal assert without indicating which register was being tested. Update these tests to report a result per register, making it much easier to see what the problem being reported is.
A similar, though less severe, issue exists with the validation of the individual bitfields in registers due to the use of immediately fatal asserts. Update those asserts to be standard kselftest reports. Signed-off-by: Mark Brown <[email protected]> --- Mark Brown (3): KVM: selftests: arm64: Report set_id_reg reads of test registers as tests KVM: selftests: arm64: Report register reset tests individually KVM: selftests: arm64: Make set_id_regs bitfield validatity checks non-fatal tools/testing/selftests/kvm/arm64/set_id_regs.c | 108 ++++++++++++++++++------ 1 file changed, 82 insertions(+), 26 deletions(-) --- base-commit: 211ddde0823f1442e4ad052a2f30f050145ccada change-id: 20251028-kvm-arm64-set-id-regs-aarch64-ebb77969401c Best regards, -- Mark Brown <[email protected]>
