Add the accelerometer and magnetometer that are present on the Motorola Moto G (2013) device.
Signed-off-by: Stanislav Jakubek <[email protected]> --- .../boot/dts/qcom/msm8226-motorola-falcon.dts | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts index 029e1b1659c9..5dbca83f2230 100644 --- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -96,6 +96,35 @@ reserved@fb00000 { }; }; +&blsp1_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_lvs1>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { status = "okay"; @@ -321,6 +350,30 @@ &smbb { }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + reg_lcd_default: reg-lcd-default-state { pins = "gpio31", "gpio33"; function = "gpio"; -- 2.34.1
