On Sat, 26 Sep 2020 15:55:12 +0200 Luka Kovacic <[email protected]> wrote:
> Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow > monitoring and control of the microcontroller from user space. > > Signed-off-by: Luka Kovacic <[email protected]> > Cc: Luka Perkov <[email protected]> > Cc: Robert Marko <[email protected]> > --- > .../stable/sysfs-driver-iei-wt61p803-puzzle | 65 +++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle > > diff --git a/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle > b/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle > new file mode 100644 > index 000000000000..36fca70d66ef > --- /dev/null > +++ b/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle I think this should go to testing, not stable. It should go to stable only after it is stable for some time. > @@ -0,0 +1,65 @@ > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/mac_address_* > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the internal iEi WT61P803 PUZZLE MCU MAC address values. > + These are factory assigned and can be changed. > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/serial_number > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the internal iEi WT61P803 PUZZLE MCU serial number. > + This value is factory assigned and can be changed. > + Please use (RO) and (RW) prefixes before the Description, instead of writing "This value is read only", i.e.: Description: (RO) Internal ... serial number. JFI: Why can these values be changed? Shouldn't they be burned into OTP? Marek > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/version > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the internal iEi WT61P803 PUZZLE MCU version. > + This value is read only. > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/protocol_version > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the internal iEi WT61P803 PUZZLE MCU protocol version. > + This value is read only. > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/power_loss_recovery > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the iEi WT61P803 PUZZLE MCU power loss recovery value. > + This value is read write. > + Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 > - Always-WA > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/bootloader_mode > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read whether the MCU is in bootloader mode. > + This value is read only. > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/power_status > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the iEi WT61P803 PUZZLE MCU power status. Power status > indicates > + the power on method. > + This value is read only. > + Value mapping (bitwise list): > + 0x80 - Null > + 0x40 - Firmware flag > + 0x20 - Power loss detection flag (powered off) > + 0x10 - Power loss detection flag (AC mode) > + 0x08 - Button power on > + 0x04 - WOL power on > + 0x02 - RTC alarm power on > + 0x01 - AC recover power on > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/build_info > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the iEi WT61P803 PUZZLE MCU firmware build date. > + This value is read only. > + Format: yyyy/mm/dd hh:mm > + > +What: > /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/ac_recovery_status > +Date: September 2020 > +Contact: Luka Kovacic <[email protected]> > +Description: Read the iEi WT61P803 PUZZLE MCU AC recovery status. > + This value is read only.
