Hi!
> Now that we have support for GPIO lines of the SMARC connector, enable
> LED support on the KBox A-230-LS. There are two LEDs without fixed
> functions, one is yellow and one is green. Unfortunately, it is just one
> multi-color LED, thus while it is possible to enable both at the same
> time it is hard to tell the difference between "yellow only" and "yellow
> and green".
> + user_yellow {
> + label = "s1914:yellow:user";
> + gpios = <&sl28cpld_gpio0 0 0>;
> + };
> +
> + user_green {
> + label = "s1914:green:user";
> + gpios = <&sl28cpld_gpio1 3 0>;
> + };
This is not suitable label for such LEDs... there's zero chance userland will
know what to do with these.
Do they have some kind of "usual" function?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
