From: Tudor Ambarus <[email protected]> Rename method to a generic name: spi_nor_sr1_bit6_quad_enable().
Use spi_nor_write_sr1_and_check(). Now we check the validity of all the eight bits of the Status Register, not just of the SR1_QUAD_EN_BIT6. Signed-off-by: Tudor Ambarus <[email protected]> --- drivers/mtd/spi-nor/spi-nor.c | 34 ++++++++++------------------------ include/linux/mtd/spi-nor.h | 2 +- 2 files changed, 11 insertions(+), 25 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 8ada2003f1c9..112f93cec7ba 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1933,16 +1933,15 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) } /** - * macronix_quad_enable() - set QE bit in Status Register. + * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status + * Register 1. * @nor: pointer to a 'struct spi_nor' * - * Set the Quad Enable (QE) bit in the Status Register. - * - * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories. + * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories. * * Return: 0 on success, -errno otherwise. */ -static int macronix_quad_enable(struct spi_nor *nor) +static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor) { int ret; @@ -1950,25 +1949,12 @@ static int macronix_quad_enable(struct spi_nor *nor) if (ret) return ret; - if (nor->bouncebuf[0] & SR_QUAD_EN_MX) + if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6) return 0; - nor->bouncebuf[0] |= SR_QUAD_EN_MX; + nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6; - ret = spi_nor_write_sr(nor, &nor->bouncebuf[0], 1); - if (ret) - return ret; - - ret = spi_nor_read_sr(nor, &nor->bouncebuf[0]); - if (ret) - return ret; - - if (!(nor->bouncebuf[0] & SR_QUAD_EN_MX)) { - dev_err(nor->dev, "Macronix Quad bit not set\n"); - return -EIO; - } - - return 0; + return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]); } /** @@ -2272,7 +2258,7 @@ static void gd25q256_default_init(struct spi_nor *nor) * indicate the quad_enable method for this case, we need * to set it in the default_init fixup hook. */ - nor->flash.quad_enable = macronix_quad_enable; + nor->flash.quad_enable = spi_nor_sr1_bit6_quad_enable; } static struct spi_nor_fixups gd25q256_fixups = { @@ -3656,7 +3642,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, case BFPT_DWORD15_QER_SR1_BIT6: nor->flags &= ~SNOR_F_HAS_16BIT_SR; - flash->quad_enable = macronix_quad_enable; + flash->quad_enable = spi_nor_sr1_bit6_quad_enable; break; case BFPT_DWORD15_QER_SR2_BIT7: @@ -4553,7 +4539,7 @@ static int spi_nor_setup(struct spi_nor *nor, static void macronix_set_default_init(struct spi_nor *nor) { - nor->flash.quad_enable = macronix_quad_enable; + nor->flash.quad_enable = spi_nor_sr1_bit6_quad_enable; nor->flash.set_4byte = macronix_set_4byte; } diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index fc3a8f5209f0..3a835de90b6a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -133,7 +133,7 @@ #define SR_E_ERR BIT(5) #define SR_P_ERR BIT(6) -#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ +#define SR1_QUAD_EN_BIT6 BIT(6) /* Enhanced Volatile Configuration Register bits */ #define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */ -- 2.9.5
