From: Tudor Ambarus <[email protected]>

In case the write of the first byte failed, retlen was incorrectly
incremented to *retlen += actual; on the exit path. retlen should be
incremented when actual data was written to the flash.

Rename 'sst_write_err' label to 'out' as it is no longer generic for
all the write errors in the sst_write() method, and may introduce
confusion.

Signed-off-by: Tudor Ambarus <[email protected]>
---
 drivers/mtd/spi-nor/spi-nor.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 0aee068a5835..be5dee622d51 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2665,12 +2665,12 @@ static int sst_write(struct mtd_info *mtd, loff_t to, 
size_t len,
                /* write one byte. */
                ret = spi_nor_write_data(nor, to, 1, buf);
                if (ret < 0)
-                       goto sst_write_err;
+                       goto unlock_and_unprep;
                WARN(ret != 1, "While writing 1 byte written %i bytes\n",
                     (int)ret);
                ret = spi_nor_wait_till_ready(nor);
                if (ret)
-                       goto sst_write_err;
+                       goto unlock_and_unprep;
        }
        to += actual;
 
@@ -2681,12 +2681,12 @@ static int sst_write(struct mtd_info *mtd, loff_t to, 
size_t len,
                /* write two bytes. */
                ret = spi_nor_write_data(nor, to, 2, buf + actual);
                if (ret < 0)
-                       goto sst_write_err;
+                       goto out;
                WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
                     (int)ret);
                ret = spi_nor_wait_till_ready(nor);
                if (ret)
-                       goto sst_write_err;
+                       goto out;
                to += 2;
                nor->sst_write_second = true;
        }
@@ -2694,35 +2694,35 @@ static int sst_write(struct mtd_info *mtd, loff_t to, 
size_t len,
 
        ret = spi_nor_write_disable(nor);
        if (ret)
-               goto sst_write_err;
+               goto out;
 
        ret = spi_nor_wait_till_ready(nor);
        if (ret)
-               goto sst_write_err;
+               goto out;
 
        /* Write out trailing byte if it exists. */
        if (actual != len) {
                ret = spi_nor_write_enable(nor);
                if (ret)
-                       goto sst_write_err;
+                       goto out;
 
                nor->program_opcode = SPINOR_OP_BP;
                ret = spi_nor_write_data(nor, to, 1, buf + actual);
                if (ret < 0)
-                       goto sst_write_err;
+                       goto out;
                WARN(ret != 1, "While writing 1 byte written %i bytes\n",
                     (int)ret);
                ret = spi_nor_wait_till_ready(nor);
                if (ret)
-                       goto sst_write_err;
+                       goto out;
 
                ret = spi_nor_write_disable(nor);
                if (ret)
-                       goto sst_write_err;
+                       goto out;
 
                actual += 1;
        }
-sst_write_err:
+out:
        *retlen += actual;
 unlock_and_unprep:
        spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
-- 
2.9.5

Reply via email to