Hi Abel,
On Mon, Jul 15, 2019 at 11:10:27AM +0000, Abel Vesa wrote:
> On 19-07-15 12:43:05, Guido Günther wrote:
> > Add a node for the Mixel MIPI D-PHY, "disabled" by default.
> >
> > Signed-off-by: Guido Günther <[email protected]>
> > Acked-by: Angus Ainslie (Purism) <[email protected]>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index d09b808eff87..891ee7578c2d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -728,6 +728,19 @@
> > status = "disabled";
> > };
> >
> > + dphy: dphy@30a00300 {
> > + compatible = "fsl,imx8mq-mipi-dphy";
> > + reg = <0x30a00300 0x100>;
> > + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> > + clock-names = "phy_ref";
> > + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> > + assigned-clock-parents = <&clk
> > IMX8MQ_VIDEO_PLL1_OUT>;
> > + assigned-clock-rates = <24000000>;
>
> We have the following in the clk-imx8mq in the vendor tree:
>
> clk_set_parent(clks[IMX8MQ_VIDEO_PLL1_BYPASS], clks[IMX8MQ_VIDEO_PLL1]);
>
> This unbypasses the video pll 1. And then we also have this:
>
> /* config video_pll1 clock */
> clk_set_parent(clks[IMX8MQ_VIDEO_PLL1_REF_SEL], clks[IMX8MQ_CLK_27M]);
> clk_set_rate(clks[IMX8MQ_VIDEO_PLL1], 593999999);
We don't have anything like this in our tree. This is our current clock
tree in that area which is setup by either the lcdif or dcss DT:
osc_25m 10 12 0 25000000
0 0 50000
video_pll1_ref_sel 1 1 0 25000000
0 0 50000
video_pll1_ref_div 1 1 0 5000000
0 0 50000
video_pll1 1 1 0 593999998
0 0 50000
video_pll1_bypass 1 1 0 593999998
0 0 50000
video_pll1_out 2 2 0 593999998
0 0 50000
dsi_phy_ref 1 1 0 23760000
0 0 50000
e.g. for lcdif we have:
lcdif: lcdif@30320000 {
...
clock-names = "pix";
assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
<&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
<&clk IMX8MQ_CLK_LCDIF_PIXEL>,
<&clk IMX8MQ_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
...
};
Do we want to add this add for dphy and lcdif?
Cheers,
-- Guido
> But none of that is acceptable upstream since the clock provider should not
> use clock consumer API.
>
> So please update the assigned-clock* properties to something like this:
> assigned-clocks = <&clk
> IMX8MQ_VIDEO_PLL1_REF_SEL>,
> <&clk
> IMX8MQ_VIDEO_PLL1_BYPASS>,
> <&clk IMX8MQ_CLK_DSI_PHY_REF>,
> <&clk IMX8MQ_VIDEO_PLL1>;
> assigned-clock-parents = <&clk IMX8MQ_CLK_27M>,
> <&clk
> IMX8MQ_VIDEO_PLL1>,
> <&clk
> IMX8MQ_VIDEO_PLL1_OUT>
> <0>;
> assigned-clock-rates = <0>,
> <0>,
> <24000000>,
> <593999999>;
>
> I've written this without testing, so please do test it on your setup.
>
> > + #phy-cells = <0>;
> > + power-domains = <&pgc_mipi>;
> > + status = "disabled";
> > + };
> > +
> > i2c1: i2c@30a20000 {
> > compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> > reg = <0x30a20000 0x10000>;
> > --
> > 2.20.1
> >
