The phy_reset hook is not set anywhere. Drop it to make stmmac_mdio_reset() smaller.
Signed-off-by: Martin Blumenstingl <[email protected]> --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 6 ------ include/linux/stmmac.h | 1 - 2 files changed, 7 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index c9454cf4f189..14aa3ee14082 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -247,7 +247,6 @@ int stmmac_mdio_reset(struct mii_bus *bus) struct net_device *ndev = bus->priv; struct stmmac_priv *priv = netdev_priv(ndev); unsigned int mii_address = priv->hw->mii.addr; - struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data; #ifdef CONFIG_OF if (priv->device->of_node) { @@ -277,11 +276,6 @@ int stmmac_mdio_reset(struct mii_bus *bus) } #endif - if (data->phy_reset) { - netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n"); - data->phy_reset(priv->plat->bsp_priv); - } - /* This is a workaround for problems with the STE101P PHY. * It doesn't complete its reset until at least one clock cycle * on MDC, so perform a dummy mdio read. To be updated for GMAC4 diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 96d97c908595..9aad16c379e7 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -92,7 +92,6 @@ /* Platfrom data for platform device structure's platform_data field */ struct stmmac_mdio_bus_data { - int (*phy_reset)(void *priv); unsigned int phy_mask; int *irqs; int probed_phy_irq; -- 2.22.0
