Both pcie-designware.c and pci-imx6.c contain custom definitions for PHY debug registers R0/R1 and on top of that there's already a definition for R0 in pcie-designware.h. Move all of the definitions to pcie-designware.h. No functional change intended.
Signed-off-by: Andrey Smirnov <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Chris Healy <[email protected]> Cc: Lucas Stach <[email protected]> Cc: [email protected] Cc: [email protected] --- drivers/pci/controller/dwc/pci-imx6.c | 6 ++---- drivers/pci/controller/dwc/pcie-designware.c | 12 +++--------- drivers/pci/controller/dwc/pcie-designware.h | 3 +++ 3 files changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index c0867df090f5..eeacdebd9b50 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -103,8 +103,6 @@ struct imx6_pcie { /* PCIe Port Logic registers (memory-mapped) */ #define PL_OFFSET 0x700 -#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) -#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) #define PCIE_PHY_CTRL (PL_OFFSET + 0x114) #define PCIE_PHY_CTRL_DATA_LOC 0 @@ -831,8 +829,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie) err_reset_phy: dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", - dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0), - dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1)); + dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), + dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); imx6_pcie_reset_phy(imx6_pcie); return ret; } diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 31f6331ca46f..086e87a40316 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -14,12 +14,6 @@ #include "pcie-designware.h" -/* PCIe Port Logic registers */ -#define PLR_OFFSET 0x700 -#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) -#define PCIE_PHY_DEBUG_R1_LINK_UP (0x1 << 4) -#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (0x1 << 29) - int dw_pcie_read(void __iomem *addr, int size, u32 *val) { if (!IS_ALIGNED((uintptr_t)addr, size)) { @@ -334,9 +328,9 @@ int dw_pcie_link_up(struct dw_pcie *pci) if (pci->ops->link_up) return pci->ops->link_up(pci); - val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1); - return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) && - (!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING))); + val = readl(pci->dbi_base + PCIE_PORT_DEBUG1); + return ((val & PCIE_PORT_DEBUG1_LINK_UP) && + (!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING))); } void dw_pcie_setup(struct dw_pcie *pci) diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 377f4c0b52da..b33ae13194be 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -41,6 +41,9 @@ #define PCIE_PORT_DEBUG0 0x728 #define PORT_LOGIC_LTSSM_STATE_MASK 0x1f #define PORT_LOGIC_LTSSM_STATE_L0 0x11 +#define PCIE_PORT_DEBUG1 0x72C +#define PCIE_PORT_DEBUG1_LINK_UP BIT(4) +#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29) #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C #define PORT_LOGIC_SPEED_CHANGE BIT(17) -- 2.20.1
