All calls to imx6_pcie_wait_for_link() share the same error path and
the state of PHY debug registers will already be printed there, so
there's no real reason we can't just use dw_pcie_wait_for_link(). Drop
imx6_pcie_wait_for_link() and replace it with dw_pcie_wait_for_link().

Signed-off-by: Andrey Smirnov <[email protected]>
Suggested-by: Lucas Stach <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Chris Healy <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c 
b/drivers/pci/controller/dwc/pci-imx6.c
index ea2617712a3b..bb3dcfdbf697 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -723,21 +723,6 @@ static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
        return 0;
 }
 
-static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
-{
-       struct dw_pcie *pci = imx6_pcie->pci;
-       struct device *dev = pci->dev;
-
-       /* check if the link is up or not */
-       if (!dw_pcie_wait_for_link(pci))
-               return 0;
-
-       dev_dbg(dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-               dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
-               dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
-       return -ETIMEDOUT;
-}
-
 static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 {
        struct dw_pcie *pci = imx6_pcie->pci;
@@ -796,7 +781,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie 
*imx6_pcie)
        /* Start LTSSM. */
        imx6_pcie_ltssm_enable(dev);
 
-       ret = imx6_pcie_wait_for_link(imx6_pcie);
+       ret = dw_pcie_wait_for_link(pci);
        if (ret)
                goto err_reset_phy;
 
@@ -834,7 +819,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie 
*imx6_pcie)
                }
 
                /* Make sure link training is finished as well! */
-               ret = imx6_pcie_wait_for_link(imx6_pcie);
+               ret = dw_pcie_wait_for_link(pci);
                if (ret) {
                        dev_err(dev, "Failed to bring link up!\n");
                        goto err_reset_phy;
-- 
2.20.1

Reply via email to