Hello,
I have a rpi-b-rev2 (two holes, 512M) and when I was trying to test vc4
driver, the HDMI wans't being detected.
So I changed the hpd-gpios from ACTIVE_LOW to ACTIVE_HIGH and now it
works correctly. I can see that modeprint from libdrm detects correctly
when the display is plugged and when it is unpluggled.
So I was wondering if this is just in my board or if there is an error
in the dts (which I think it's unlikely).
In any case I am dropping this email here in case anyone else see this
problem, if you do, try appliying the patch below.
Regards,
Helen
---
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 5641d162dfdb..28e7513ce617 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -93,7 +93,7 @@
};
&hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
&pwm {
--
2.20.1
